Hitch and Ball Mount Locking Pin for B&W Hitch  

To secure the B&W Tow & Stow 3-Ball Mount #BWTS10048B you will need the InfiniteRule Locking Pins #34061775-D. These pins are all lockable with a 42,000lb sheer strength. It will allow you to remove all the included pins which come with the…

If you want to totally lock the B&W Tow & Stow 3-Ball Mount #BWTS10048C you would need a lock set that locks the shank to the hitch and locks for the platform then to the shank with the InfiniteRule Locking Pins #34061775-D.

We have just what you need to lock all of the pins of the B and W Tow n Stow Ball Mount part #BWTS10037B that you referenced with the part #34061775-D. This comes with lock pin replacements for all of the platform pins as well as the hitch pin and…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

With this truck bed configuration (6-3/4) on your 2024 Silverado 2500, you'll need a slider hitch so that you can make turns properly without the trailer making contact with your truck. I recommend the B&W Patriot #BWRVK3270 due to it's…

Hello Volker, thanks for reaching out. For your 2024 Chevy Silverado 2500 6.5' bed with steps in front and back of the bed you can use the following Torklift Camper Tie Downs: - Custom Fit Tie Down Kit #TL86NR Keep in mind that these will only…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…