Parts Needed to Convert Trailer With Tandem 15k Axles to Electric Over Hydraulic From Electric
Updated 01/10/2022 | Published 01/08/2022
Products Featured in This Question
Question:
looking to convert from electric to hyd. over electric. I have two tandem 15 k akles. Can you provide me a complete set up. 4 brakes ,line kit and pump. One questions is can I install the higher 1600 psi pump instead of the recommended 1000psi pump. I am usually close to max weight and am getting pushed. Thank you
asked by: Mike M
Helpful Expert Reply:
We can get you set up with an electric over hydraulic system for your trailer with 15,000 lb tandem axles. I will say that you will not want to go with the higher pressure 1,6000 psi actuator, which is too high for drum brakes and can potentially blow out the wheel cylinder.
What you can do though is go with a 1,200 psi actuator made for drum brakes, which will still give you excellent stopping power. Here is exactly what you will need for your set up:
- HydraStar Electric Over Hydraulic Actuator for Drum Brakes - 1,200 psi # HBA-12
- Dexter Hydraulic Drum Brake Kit - 12-1/4" - Left and Right Hand Assemblies - 15K # 23-406-407
- Mounting Bolts and Hardware for 12-1/4" Brake Assemblies # BRKH122510
- HydraStar Hydraulic Brake Line Kit - Tandem Axle - 15' Long # HS496-152 or 25' Long # HS496-252
This will be everything you need to go from electric brakes to electric over hydraulic. It's a really smart idea to convert since this is the best overall braking set up you can get for a trailer, as hydraulic brakes give you the most stopping power and electric brakes give you the quickest response time.
Product Page this Question was Asked From
Mounting Bolts and Hardware for 12-1/4" Brake Assemblies - 10,000 lbs to 15,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- 10000 - 15000 lbs
- Hardware
- 12-1/4 Inch
- Bolts
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Hydraulic Trailer Brakes - Duo Servo - 12-1/4" - Left/Right - 15K
- Shop: Hydrastar Electric Over Hydraulic Actuator for Drum Brakes - 1,200 psi
- Q&A: Replacement Brakes For Gooseneck Trailer With Heavy Axles
- Shop: Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Right Hand - 12,000 lbs
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12-1/4" - Left/Right Hand Assemblies - 15K
- Search Results: trailer brake magnets
- Search Results: trailer magnets
- Shop: Dexter Trailer Hub and Drum Assembly for Heavy-Duty 15K Axles - 8 on 275mm Oil Bath
- Shop: Dexter Trailer Brake Drum for 12,000-lb and 15,000-lb Axles - 12-1/4" x 5" - 8 on 6-1/2
- Shop: Hydrastar Hydraulic Brake Line Kit - Tandem Axle - 25' Long, 3/16" Main Line
- Q&A: Replacement Brakes, Bearings, Seals, and Races for a Dexter 9,000 lbs Axle
- Q&A: What Brake Kit is the Best Replacement for My Tie-Down Engineering Caliper 46304 on Vortex Hubs?
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: What is the Difference Between the Kodiak Disk Brake Kits K2R35DKG and K2R35DS?
- Q&A: What is the Four Bolt Brake Mounting Flange for 8,000 Lb Axles
- Q&A: Can Grease be Used in Oil Bath Hub
- Q&A: Replacement 12 Inch Brake Assemblies for Redline EB01-140 and EB01-145 From Dexter Axle
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Measure for Trailer Hitch Drop
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Most Popular Wheel Bearings