Correct Replacement Bearing for Ram Square Direct Weld 12K Jack

Updated 12/27/2021 | Published 12/26/2021

Products Featured in This Question

Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks - 12K

(247)

$80.91

Replacement Bearing for etrailer and Ram Square Jacks - 10,000 lbs

(49)

$25.17

Question:

My Ram jack has a lower bearing just as you show but it also has a upper bearing that sits just below the horizontal gear. I don’t see any option for that bearing on your exploded view. Do you stock the upper bearing? Thank you,

asked by: Tim O

Expert Reply:

The bearing is not included with the Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks - 12K part # TJD-12000-RODNUT. There is a bearing washer at the top but the bearing is sold separately as the Replacement Bearing for etrailer and Ram Square Jacks part # TJD-12000-BR. If you take a look at the attached exploded view of the jack, you'll see there is a bearing at the top above the washer but no bearing on the bottom. I have attached an install video of said parts as well.

It sounds like you may have a different model/series and in which case I would need to know what that is to assist.

expert reply by: Conner L