Replacement Wheels For Horse Trailer With 15" X 5" Wheels and 5 on 4-1/2" Lug Pattern

Question

Question:

Hello, I have a horse trailer with 15 x 5 wheels, bolt pattern is 5 x 4.5. the center hole measures 2.6 inches. I cant find a wheel with the center hole that small. What can I do? Thank you for your time

asked by: Tim G

1

Helpful Expert Reply:

Since your Horse Trailer wheels are going to be lug centric rather than hub centric the larger pilot hole diameter of the Vesper Steel Modular Trailer Wheel # MX54FR will work as a suitable replacement for your current wheels.

The industry used to be filled with several different size pilot holes and hub sizes so most manufacturers have increased their pilot hole diameter to work with all of the hub pilot sizes. This lessens the chance of having wheels that won't fit on certain hubs.

expert reply by: Bud M

1

Answer 1

For a trailer tire, the narrowest option rim for any given tire is going to be the best option. For a 205/75-15, the best option would be a 5 inch rim. The reason that narrower is better is because it provides more support for the tire. Since trailer…

view full answer...

Answer 2

Be sure to verify with the tire manufacturer but you should not have any issue fitting a ST205/90R15 on the Vesper Steel Modular Trailer Wheel #MX54FR. This wheel is 5" wide and is the required size for a Karrier ST205/75R15 Radial Trailer Tire…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Eric, Thanks for your question. As long as you are able to remove the factory hitch from your 2025 GMC Sierra 2500, the #C96CR will work as a replacement. Of note, the #C96CR will more than likely mount up a bit differently than your factory…

view full answer...

Answer 11

Hi Dennis! The Hellwig Load Pro 35 Heavy Duty Helper Springs with Custom Mounting Kit - Above Axle #HE93XR can potentially raise an unloaded truck a little, but it's going to be very minimal and will really only happen if your suspension is…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Replacement Wheels For Horse Trailer With 15" X 5" Wheels and 5 on 4-1/2" Lug Pattern

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching