Recommended Hubs for 80's Shorelandr Boat Trailer with 5 Bolt Hubs and 8" Wheel
Updated 12/24/2021 | Published 12/17/2021
Products Featured in This Question
Question:
I have a 1989 Shorelandr boat trailer. I want to replace the hub assembly. I removed the hub and the old one has bearings L44649. Also, it appears that it is a 5 on 4 1/2 hub. However, it has 8 wheels 4.80. Which would be the correct hub assembly and which would be the correct bearing buddies for this?
asked by: Mark F
Expert Reply:
The CE Smith Trailer Hub Assembly part # CE13311 will be a fit for your 1989 Shorelandr boat trailer. These hubs use L44649 bearings, a 5 on 4-1/2" bolt pattern, and will work with 8" wheels. They will then work with the CE Smith Bearing Protectors part # CE16271 if you want to opt for easy greasing. The hubs are pre-greased so you don't have to worry about packing the bearings.
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2700 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- CE Smith
more information >
Continue Researching
- Search Results: trailer leaf springs
- Search Results: 5 leaf trailer leaf springs
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Search Results: bearing l44649 and l68149 trailer bearings races seals caps
- Video: Installation of the etrailer Trailer Hub and Drum Assembly AKHD-545-35-K
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dexter Bearing Kit for 1-1/16" BTR Spindle
- Shop: Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Replacement Bearings, Races and Grease Seal For a UFP HD-1377-10 Trailer Hub
- Q&A: Replacement Bearings, Seals, Hubs For 2021 Riverside Retro 135 With 3,500 lb Axle
- Q&A: Replacement Bearing Recommendation for H-1377 Idler Hub
- Q&A: How to Determine Correct Replacement For UFP H1377 Hub
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Search Results: l68149
- Search Results: shorelandr
- Video: Detailed Breakdown of the Fulton Boat Trailer Jack w/ Wheel
- Video: Fulton Boat Trailer Jack w/ Wheel: The Breakdown