Replacement Bearings, Seals, Hubs For 2021 Riverside Retro 135 With 3,500 lb Axle
Published 03/05/2024
Products Featured in This Question
Question:
Hi, Im trying to identify an axle on a 2021 Riverside Retro 135 camper. There is a sticker which I can send a photo of with what looks like a model number 35-SB-82-64-33836. There is also a serial number but since I dont know the manufacturer I cant use a lookup site. On the outside of the brake hubs there is a marking of Axle Teknology but I cant find any information on that manufacturer. Im hoping you can help me identify the manufacturer so I can get the specs for any parts Ill need along the way. I can send a picture of the label and/or brake hubs when you respond if that helps. Thanks, Rob
asked by: Rob M
Expert Reply:
Hey Rob; thanks for the photos and it was actually the one with the hub number that did it. That's a BD 545 which is an AxleTek 3,500 lb hub and drum like the Trailer Hub and Drum Assembly # AKHD-545-35-K.
The 35 on the axle sticker was a good indicator it was a 3,500 lb axle, but the hub number verified it. So you can use that hub and drum, and for a bearing kit use Hub Bearing Kit # BK2-100 or for Timken parts the Timken Bearing Kit # TMK52VR.
Both kits come with the bearings, races, and seal needed for one hub (so for both hubs you would need two kits).
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: battery
- Search Results: trailer breakaway battery
- Search Results: trailer bearings races seals caps
- Search Results: hub and drum assembly
- Search Results: trailer tires and wheels
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Where are the Bearings for the eTrailer Trailer Hubs Made
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Video: Feature Review Trailer Hub and Drum Assembly
- Video: Let’s Check Out the Dexter Electric Trailer Brake Assembly
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Replacement Magnet Kit for 10" Electric Trailer Brake Assemblies - 3,500 lbs
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Video: A Closer Look at the Incandescent Trailer Fender Light w/ Reflector
- Search Results: l44649
- Q&A: Bearing Kits For Lippert 3,500LB Trailer Axles
- Search Results: l44610
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Video: Timken Bearing Kit Installation - Enclosed Trailer
- Q&A: Difference Between etrailer and Timken Bearing Kit
- Video: A Closer Look at the Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles
- Video: Review of the Grease Cap Plug for E-Z Lube Grease Caps
- Q&A: How to Verify if Timken 3,500 lb Axle Bearing Kit is Correct for Tracker Boat Trailer
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Hub Bearing Kit 3500LB Axle - BK2-100
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
Rob
3/5/2024
Thanks Kyle! I also received a response from Riverside RV in which they told me the axles were manufactured by Liberty Wheel End LLC. The part number is 35-SB-82-64, D3500 HF=82 5-4.5 SC=64 US Leaf Spring. As far as I can tell these are not available to the general public if they are even made anymore. -Rob