What is the Dimension of the Vertical Bolt on The Base Plate Adapter # e98984?

Question

Question:

what is the dimension of the vertical bolt on the Adapter for Roadmaster Sterling Tow Bar to etrailer Classic Base Plates?

asked by: Shelly

0

Expert Reply:

The vertical bolt on the Adapter for Roadmaster Sterling Tow Bar to etrailer Classic Base Plates # e98984 is 1/2” X 3”. I went ahead and attached a parts outline from the instructional manual to provide you with better perspective.

expert reply by: Bob C

0

Adapter for Roadmaster Sterling Tow Bar to etrailer Classic Base Plates # e98984 Parts Diagram
(click to enlarge)

Answer 1

Hey Ray, The etrailer baseplates #e98965 do not work directly with that Roadmaster Nighthawk. However, there is an adapter we have available for them to work seamlessly. You will want to pair that baseplate with the Roadmaster adapter #e98984. That…

view full answer...

Answer 2

Hey Russ, the length of the cable of the Roadmaster Straight Power Cord for Tow Bars with Cable Guides #RM82BQ that you referenced is 78 inches. We have a longer version too with the part #RM72BQ which is 90 inches long. How long do you need?

view full answer...

Answer 3

Hey Ed! Which Roadmaster tow bar do you have? The correct adapter for the etrailer Invisible Base Plate Kit #e98949 depends on the tow bar. You can choose from the following: -Roadmaster Tracker, Falcon 2, Falcon All Terrain, Blackhawk, Blackhawk All…

view full answer...

Answer 4

Hey James! The Roadmaster Crossbar-Style Base Plate Kit #RM-524443-4 does not include the actual crossbar. If you don't have one you will need the Replacement Quick Disconnect Crossbar Assembly for Roadmaster Tow Bars #910021-00. Do you have the…

view full answer...

Answer 5

Hey Kenneth, the first thing you need to flat tow your 2025 Jeep Wrangler is a base plate kit like the Roadmaster part #RM-521453-5 which is a confirmed fit and easy to use. In addition to the base plates, you will also need a compatible tow bar,…

view full answer...

Answer 6

Hey James, welcome back! The only plug and play wiring harness I have for flat towing is the Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR. This has a 4-way connector that plugs into your motorhome. This plug and play harness…

view full answer...

Answer 7

Hey, Kendra. Thanks for your question. Yes, there is an adapter that you would need to be able to connect the Roadmaster Falcon 2 Tow Bar #RM-520 to the etrailer Invisible Base Plate #e98965. The adapter needed is part #e98983. The way these adapters…

view full answer...