How to Tell if Tow Vehicle Has Smart Alternator to Install Redarc BCDC Charger
Published 11/30/2021
Products Featured in This Question
Question:
Does the 2007 Nissan Xterra have a smart alternator, and if so how do attach the ignition wire?
asked by: Chris B
Expert Reply:
I have a way for you to test and see if your 2007 Nissan Xterra has a smart alternator (I doubt it does), but I unfortunately don't have a list of what vehicles have a smart alternator so it will require you to do some testing:
1. Locate your main vehicle battery
2. Start the engine, ensuring any fans, radio, lights etc. are turned off.
3. Take a voltage reading across the main vehicle battery
4. Leave running for around 5/10 minutes, then repeat step 3
If your readings are around 14.4V DC then then you most likely have the traditional, non-smart alternator.
If your reading is closer to 12.5-13.5V then it’s likely that you have a smart alternator.
If you happen to have a smart alternator then you're also going to need the Relay Kit # 331-RK1260. You will hook it up using the wiring method in the attached photo.
When it comes to an install kit for the BCDC we recommend using the kit # e89ZR for an overlanding setup or the kit # e79ZR for a trailer installation setup.
(click to enlarge)
Product Page this Question was Asked From
Redarc In-Vehicle BCDC Battery Charger - Dual Input - DC to DC - 12V/24V - 25 Amp
- Battery Charger
- Battery Charger
- RV/Camper
- Trailer
- 12V
- Charges and Maintains
- AGM
- Calcium
- Gel
- Lead Acid
- Lithium
- Solar Panels to Auxiliary Battery
- Vehicle Battery to Auxiliary Battery
- Smart Charge
- Trickle Charge
- Redarc
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: 60-Amp Relay Kit for Redarc In-Vehicle BCDC Battery Charger Review
- Shop: 60-Amp Relay Kit for Redarc In-Vehicle BCDC Battery Charger
- Shop: Overlanding Vehicle Installation Kit for Redarc BCDC - 25 Amp
- Shop: Trailer Installation Kit for Redarc BCDC - 25 Amp
- Shop: Redarc In-Vehicle BCDC Trailer Battery Charger - Single Input - DC to DC - 12V/24V - 12 Amp
- Q&A: How To Charge Camper Battery From Vehicle Battery While Being Towed
- Q&A: Wire Gauge Required for Redarc 60-Amp Relay Kit
- Q&A: Which Pin On A 7-Way Should Have Constant 12V Power When Vehicle Is Running
- Q&A: What Ignition Circuit Does 60-Amp Relay Kit for Redarc # 331-BCDC1225D Wire To
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Q&A: How Does The Furrion Chill Cube Thermostat Get Wired To The AC System
- Article: How to Measure for Trailer Hitch Drop
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord
- Search Results: trailer wiring
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Q&A: Recommended SnapPad Jack Pads for a HWH Leveling System on a Motorhome
- Search Results: trailer jack
- Video: Towing Mirror Options - Custom Fit VS Universal Fit
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
on Battery Charger
