Installation kit lets you install your Redarc BCDC 25-amp battery charger (331-BCDC1225D) in your vehicle to get you ready for overlanding. Includes everything needed for most standard installations. 1-800-940-8924 to order etrailer accessories and parts part number e89ZR or order online at etrailer.com. Free expert support on all etrailer products. Great prices and Fastest Shipping for Overlanding Vehicle Installation Kit for Redarc BCDC - 25 Amp. Accessories and Parts reviews from real customers.
All Info
Q & A (0)
Related Parts
Photos
etrailer Accessories and Parts
- e89ZR
Battery Charger
Battery Charger Install Kit
etrailer
Installation kit lets you install your Redarc BCDC 25-amp battery charger (331-BCDC1225D) in your vehicle to get you ready for overlanding. Includes everything needed for most standard installations.
Features:
Installation kit lets you install the Redarc BCDC 25-amp battery charger in your vehicle or cargo area
28' Long, 4-gauge cables connect vehicle battery to BCDC with quick-connect Anderson plug
6' Long ends with ring terminals connect to battery
22' Long jumper ends wire to charger - clamps will need to be removed
(2) 40-Amp fuses with cable crimp lugs protect against short circuits and overloads
Battery terminal extenders let you easily hook up accessory cables
2 Top post battery extenders and 2 side bolt extenders included to fit your application
Heavy-gauge crimp connectors, heat shrink tubing, and extra ring terminals are included for connecting wiring
4-Gauge wire crimp connectors
(6) 6" Long, 8- to 2-gauge heat shrink tubing
(2) 10-mm x 25 sq. mm, 4-Gauge ring terminals
Hammer crimper lets you crimp connectors onto heavy-gauge wires
8 Self-tapping screws for mounting charger
25 Cable ties let you secure wiring in place
Additional wiring included for use with vehicles that have a smart alternator
20" Long, 14-gauge wire
(10) 14- to 16-gauge butt connectors
For a typical lead acid battery setup, refer to the wiring diagram (shown with fuses and optional LED and solar panel - sold separately) below:
For a typical Lithium ion (LiFePO4) battery setup, refer to the wiring diagram (shown with fuses and optional LED and solar panel - sold separately) below:
I have a way for you to test and see if your 2007 Nissan Xterra has a smart alternator (I doubt it does), but I unfortunately don't have a list of what vehicles have a smart alternator so it will require you to do some testing:
1. Locate your main vehicle battery
2. Start the engine, ensuring any fans, radio, lights etc. are turned off.
3. Take a voltage reading across the main vehicle battery
4. Leave running for around 5/10 minutes, then repeat step 3
If your readings are around 14.4V... view full answer...
According to my research your 2021 Chevy Silverado will have the variable voltage where the alternator adjusts output based off of demand. This means you need to connect the blue wire of the Redarc In-Vehicle BCDC Battery Charger # 331-BCDC1225D to the ignition on your pickup.
If you don't already have the wiring and fuses you need we have a few packages you can choose from for that as well. If you plan on overlanding then use kit # e89ZR but if you'll be using it for a standard trailer... view full answer...
Info for this part was:
Edited by:
Lindsey S
Updated by:
Wilson B
Written by:
Kristina F
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.