Rock Tamer Hub Mounting Options

Question

Question:

Hi, I own a 2015 Ford F350 with an OEM stock Ford receiver hitch. It has a 3inch receiver with the 2 1/2inch . The issue I have is the 3inch receiver has another reinforcing sleeve welded on the outside making the overall width about 3 9/16inch wide overall. Do you stock anything for the Rock Tamer system that would fit this? Photod attached. Thank you!

asked by: Brett H

0

Expert Reply:

Thanks for the pictures! I see what you are talking about. The collar on the OEM hitch receiver will not allow you to mount an accessory on the outside. I do have a solution for you that will allow you to use the Rock Tamer System with any of the three sizes of ball mount options you have available depending on which one you use. The Replacement Hub for Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches item # ERT057 fits around the actual ball mount not the receiver itself. This allows you to mount the Rock Tamer System to your 2015 Ford F-350 Super Duty.

We also have this hub for 2" receivers item # ERT034

and 3" receivers item # RT34FR

expert reply by: Jerred H

0

customer pic 1
(click to enlarge)

customer pic 2
(click to enlarge)

customer pic 3
(click to enlarge)

customer pic 4
(click to enlarge)

Answer 1

Hi David, Rock Tamers require an inch of space on the ball mount shank in order to mount. If the portion of the shank exposed where you'll be installing the Rock Tamers is 2" x 2" then you'll want #ERT00108, for 2.5" x…

view full answer...

Answer 2

Yes, both the 2 inch hub, #ERT034, and the 2-1/2 inch hub, #ERT057, attach to the same side arms, #ERT039 and #ERT040, and use the same clamp bolts, #ERT052. So the 2 inch hub will work with the same parts currently on your 2-1/2 inch system!

view full answer...

Answer 3

Hello Sam; yes, we do. Take a look at the following: - Replacement Hub for Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches #ERT057

view full answer...

Answer 4

In order to use the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches part #ERT00110 you'll need a ball mount with extended length shank. For a 2-1/2" hitch, the best option we have would be the BulletProof Hitches…

view full answer...

Answer 5

Hi Lance; the Rock Tamers #ERT00108 are not compatible with the Shocker Hitch HD Air Cushioned 2-Ball Mount #SHK95VR. The Rock Tamers require that 1" of clearance as seen in the picture below. I attached another picture showing what it looks…

view full answer...

Answer 6

Hello Greg, Great question, and yes level towing is important. The average height for a mid-size to full-size travel trailer is 22 to 28 inches, the average height for an F-350 with 4 wheel drive is 20–24 inches, with that being said you will most…

view full answer...

Answer 7

Good question, Bill! Kind of surprised we don't have that listed anywhere, but the BulletProof Hitches Aluminum Adjustable 2-Ball Mount - 2-1/2" Hitch - 6" Drop/Rise - 14K #BPH77MR weighs right at 19.5 pounds. This makes it the lightest…

view full answer...

Answer 8

Either hitch pin hole of the B&W Tow and Stow Ball Mount part #BWTS10049B can be used in the hitch of your vehicle. Whichever one works for your towing application best will be perfectly fine.

view full answer...

Answer 9

When rotating tires like the #AM10303 on your triple axle trailer I recommend using the X pattern. This means you will swap the front driver side tire with the back passenger side tire, the front passenger side tire with the back driver side tire,…

view full answer...

Answer 10

Hey Kelly! It looks like our information shows your tire size is 205/75R14. However, I would double check the tire size on the side of your existing tires to see if that matches. Are you looking for just a tire or a wheel and tire combo? Assuming you…

view full answer...

Rock Tamer Hub Mounting Options

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching