Where Do You Drill The Hole For The B&W Turnover Ball On a 2022 Chevrolet Silverado 2500HD?

Question

Question:

Where do you drill the hole for the B&W Turnover Ball on a 2022 Chevrolet Silverado 2500HD?

asked by: Kelvin

0

Expert Reply:

The hole for the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1020 on your 2022 Chevrolet Silverado 2500HD will be either 45-5/16" for a long bed(8') or 37-1/8" for a short bed(6-1/2') to the center of the hole from the rear of the truck bed. It will be centered between your passenger side and driver side fenders.

I have linked the installation instructions for this hitch below as well as a installation video showing us install the hitch on a 2020 Silverado 2500HD.

I recommend installing a Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness # HM54FR so that you will be able to plug in your 7-way connector inside the truck bed and not have the 7-way cord becoming damaged by stretching over your tailgate and into the bumper mounted 7-way.

expert reply by: Bud M

0

Hole Location For B&W Turnover Ball GNRK1020
(click to enlarge)

Answer 1

The overall dimension of the B&W Companion 5th Wheel Trailer Hitch with Slider #BWRVK3400-5W is 45 inches long x 34-3/8 inches wide. For your 2014 Ford F-250 with 6-3/4 foot bed, you will have approximately 20 inches between the front (cab-side)…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hey Jordan! Based on your measurement you have a Lippert 1116 or 1716. If you want to confirm that feel free to send me the S/N on your pin box. The Gen-Y Nomad you were looking at is for the Rhino Box so that is not a fit. What you need is the Gen-Y…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Hey Jeff! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR97MV comes with a Demco eZ-Latch. The best option for a lock is the InfiniteRule Lock for Cast Demco eZ-Latch Trailer Couplers #IR66FR. This is designed to for a standard coupler but…

view full answer...

Answer 10

Hello Femi, Thanks for reaching out! Both the Demco Autoslide #DM39SV and #DM29GV are excellent choices for your 2026 GMC Sierra 3500 with the factory prep package, and both are compatible with your Grand Design Reflection 150 Series. The biggest…

view full answer...

Answer 11

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Where Do You Drill The Hole For The B&W Turnover Ball On a 2022 Chevrolet Silverado 2500HD?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching