Recommended SumoSprings for Hauling 1000 lb Round Hay Bales w/ 2007 Chevy Silverado 1500 Classic

Question

Question:

I have a 2007 Chevy Silverado Classic 1500 4x4 that I haul a 1,000 lb round bale in back with once a wk. The original bump stops are gone, and I’m interested in installing some Sumospings to replace them. Which ones do you recommend?

asked by: Kevin S

1

Helpful Expert Reply:

If a 1000 lb round bale is the heaviest thing you'll haul in the truck bed, I'd recommend going with the SumoSprings # SS95MR that you'd looked at, which would provide you a little bit of leeway in case the bales vary in weight a bit as the springs offer up to 1500 lbs of support per pair.

If you'll occasionally haul items heavier than that, I'd go a step up in capacity with the # SS45MR which can support up to 2800 lbs.

The SumoSpirngs are more pliable than other jounce spring replacements, so even when the vehicle suspension compresses so it's sitting on the replacement jounce springs, the truck won't ride like a buckboard.

I've linked to some product videos you might find helpful.

expert reply by: Mike L

1

Answer 1

Hey Jim, good to hear from you again! I'm surprised to see the feedback on the 1.5K SumoSprings #SS95MR simply because people normally say that these have zero effect with the truck unloaded, but since that seems to be the general consensus I…

view full answer...

Answer 2

For the 2019 model year, Chevy offered two different body styles for the 1500 Series Silverado, the Silverado 1500 (all new body style) and the Silverado 1500 Limited (old body style), which was mechanically and visually identical to the 2018 model.…

view full answer...

Answer 3

The problem you are having is pretty common with newer 1/2 ton trucks. Due to consumer complaints about the harsh ride, the manufacturers have made the rear suspension more supple which is fine unless you're trying to tow. A product like the easy…

view full answer...

Answer 4

For your truck setup and trailer tongue weight of 700-lbs or less I would go with the 1000-lb Super Springs kit, part #SSR-209-40, which is the one you referenced in your question. These will engage with enough resistance to give you load support for…

view full answer...

Answer 5

There are three different SumoSprings Solo Custom Helper Spring options for a 2008 Chevrolet Silverado 1500. The difference is indeed weight capacity; part #SSR-209-40 for 1,000 lbs, part #SS95MR for 1,500 lbs, and part #SS45MR for 2,800 lbs. The…

view full answer...

Answer 6

Between the SumoSprings and the Timbren kits for your 2015 GMC Sierra 1500 I'd go with the SumoSprings #SS95MR as the Timbrens are notoriously harsh when the truck is unloaded. That said the best option is the RoadActive Suspension kits like the…

view full answer...

Answer 7

I can gladly help you with your spacing problem but I am going to send you in the direction of another product. SumoSprings will not work for your application. I recommend going with the Timbren Rear Suspension Enhancement System item #TGMRCK15S.…

view full answer...

Answer 8

Since the SumoSprings will be helping to support the trailer's tongue weight load, ideally you'll want to match the amount of support offered by the SumoSpring to the trailer's tongue weight. Since at most, the tongue weight of your dump…

view full answer...

Answer 9

The air helper springs I strongly recommend for your 2018 Chevy Silverado 1500 Z71 are the SumoSprings Solo Custom Helper Springs #SSR-209-40 because they offer your truck the best combination of ride enhancement and durability. The SumoSprings will…

view full answer...

Answer 10

We offer both custom-fit pickup truck bed mats for specific year/make/model/version trucks and also universal-fit mats like the BedRug Universal Truck Bed Mat #BMX00D. This mat is 1/2-inch thick and measures 66 x 98-inches and is intended for trucks…

view full answer...

Answer 11

I recommend BedRug Universal Truck Bed Mat part #BMX00D that is 1/2" thick if you have a drop-in liner. If you have a bare bed or spray in liner this mat will not fit properly. This is the only mat we have that is 1/2" thick that is…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Recommended SumoSprings for Hauling 1000 lb Round Hay Bales w/ 2007 Chevy Silverado 1500 Classic

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching