Front Mounted Hitch Receiver Fit for 2020 Ram 3500 Diesel

Question

Question:

The product description says it won’t fit diesel but another expert answer on your site said it will fit gas or diesel. Can you confirm this will fit a diesel?

asked by: Brian M

0

Expert Reply:

Draw-Tite has confirmed that their 65084 front mounted hitch receiver which we sell as part # DT36MR is NOT a fit for Diesel models of the 2019-2021 Ram 3500 truck, due to the extra plumbing used on the Diesel model.

We do offer a fit for you Diesel truck, however. The EcoHitch # EH37FR will sit a little higher on the front of the truck, which helps it avoid the intercooler and its related plumbing. Because it sits higher up on the vehicle, you'll also have better ground clearance and a better approach angle as well.

I'll provide a photo showing what the hitch looks like once installed.

expert reply by: Mike L

0

Installed Appearance of EcoHitch EH37FR on Ram 3500
(click to enlarge)

Answer 1

For your 2021 Ram 2500, the hitch that offers the greatest amount of ground clearance would be the EcoHitch #EH37FR which is compatible with both Diesel and gas engine Ram 2500 models. Since the hitch receiver will be partially blocked by the license…

view full answer...

Answer 2

Hey Chris, Our Fitguide can be a bit confusing sometimes. Essentially the whole category is broken down into whether they fit diesel or non-diesel models. Since the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH37FR fits both gas and diesel…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hey, Michael! Thanks for reaching out. Yes, we do carry a front mount hitch for your 2025 Ram 2500 diesel. The EcoHitch Hidden Front Mount #EH37FR will fit both diesel and non-diesel models, but it will not fit the Power Wagon models. There’s no…

view full answer...

Answer 12

Hi Robert! The EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" #EH37FR will indeed fit your 2026 Ram 3500 diesel Mega Cab Laramie edition. I confirmed this with EcoHitch and we actually have a review from another person that…

view full answer...

Front Mounted Hitch Receiver Fit for 2020 Ram 3500 Diesel

Products Featured in This Question

Continue Researching