Front Hitch that Fits 2021 Ford F-150 with Auto Deploying Air Damn

Question

Question:

Hello, How does this hitch work with the with auto deploying air dam? There doesnt seem to be any specific information about this that I can see. Can you explain how this will work and any specific install information please, thanks. Wayne

asked by: Wayne K

0

Expert Reply:

The Draw Tite Front Hitch part # 65067 does fit with the auto deploying air dam of your 2021 Ford F-150.

expert reply by: Jameson C

0

Answer 1

The Draw Tite hitch part #65067 is a fit for your 2022 Ford F-150 as long as it doesn't have the auto deploying air dam. It would not reduce ground clearance either since it fits the air dam gets cut around it when installed.

view full answer...

Answer 2

The Draw-Tite Front Mount hitch part #65067 installs so that it sticks out from the plastic air dam of the Ford. The hitch does not sit lower than the lowest part of the truck so it does not reduce ground clearance. I have attached a photo for your…

view full answer...

Answer 3

The 2" receiver for the EcoHitch item #EH87SR sticks out right through the middle of the air dam. I have attached a picture below that will show you what this front hitch looks like once installed. The EcoHitch Hidden Front Mount Trailer Hitch…

view full answer...

Answer 4

High William; we haven't had an F-150 come in for installation with the Active Air Dam so we don't have it in an installation video. I went ahead and attached a picture of the #EH87SR instructions below showing what the process is like. It is…

view full answer...

Answer 5

I suggest the Draw-Tite Front Mount hitch, #65067 that installs through a cut out in the plastic air dam of the F-150. The hitch does not sit lower than the lowest part of the truck so it does not reduce ground clearance. Trimming the lower air dam…

view full answer...

Answer 6

I must admit to not being sure what you are referring to. The Curt Channel Style Adjustable Ballmount #C45900 does not have the three holes as the anti rattle piece ( #C24DR ) screws into the back of the actual ball part (see picture). Was there…

view full answer...

Answer 7

Hello Steve. The EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH87SR will indeed fit on a 2024 Ford F150. The OEM skid plate will need to be either trimmed or removed. Another thing to watch out for is the auto deploying air dam. If the auto…

view full answer...

Answer 8

While the Draw-Tite Front Mount Trailer Hitch Receiver #65067 has not yet been confirmed to fit your 2023 Ford F-150, it is safe to say it will still fit as the only changes to the 2023 from 2022 is some trim level changes. I cannot say if the hitch…

view full answer...

Answer 9

The front mount trailer hitch receiver with the best ground clearance once installed on your 2021 Ford F-150 is the Draw-Tite #65067 in which the bottom of the receiver sits just above the bottom of your air dam so you will not lose any ground…

view full answer...

Answer 10

The good news is that neither the Curt #C31083 or the Draw-Tite #65067 front mount trailer hitches will reduce the ground clearance on your 2018 Ford F-150. If you want a receiver that sits above the lowest piece of fascia then the Curt requires that…

view full answer...

Answer 11

I checked with Draw-Tite and the Draw-Tite Front Mount Trailer Hitch Receiver part #65067 is a confirmed fit for a 2023 Ford F-150, all models without an active air dam. This hitch features a bolt-on fit without any drilling required. It will be a…

view full answer...

Answer 12

The Draw Tite part #65067 will sit lower to the ground than the Curt hitch part #C31083 which is also a fit for your 2016 Ford F-150. The Draw Tite requires you to notch a couple inches out of the bottom of the air dam up front, but the Curt requires…

view full answer...

Front Hitch that Fits 2021 Ford F-150 with Auto Deploying Air Damn

Continue Researching