Replacement Gas Strut for 654150 0550N 091/16

Question

Question:

IM LOOKING FOR A REPLACEMENT GAS STRUT 654150 0550N 091/16 DO YOU SELL ANY REPLACEMENTS?

asked by: AUSTIN

0

Expert Reply:

I have a solution for you but we do not carry an exact replacement for the 654150 0550N 091/16 strut . The strut we carry that is almost the same is the Solera Gas Strut for Short and Flat Awning Arms item # LC280343 that you were looking at.

The Solera Gas Strut strut is 26.46" when extended and 15.04" when retracted. It exerts 124 lbs of force and has the same pair of metal ends. You will just need to ensure yours is the same length when it is retracted.

expert reply by: Jerred H

0

Answer 1

The correct replacement for your 1-065-041012-01 motor is part #LC141893 from Lippert. Your original motor had a 7140 rpm speed. The Stromberg-Carlson #LG-196308 you specified has a 5430 rpm output, so it wouldn't be a good choice. You'll…

view full answer...

Answer 2

Here is the information I was able to find on your Stabilus 654150 0550N 275/12 A 15 gas strut which you can verify with yours. The Stabilus strut measures 26.496" when extended and 14.921 when retracted at the center of the mounting holes with…

view full answer...

Answer 3

Hey Tony, we have the High Pointe Microwave part #HP84ZR that would fit the cut out you have as it measures 22-5/16" wide x 15-1/8" tall x 14-1/2" deep. But do you need a front vent setup for it or am I misunderstanding you?

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 9

Hey Joseph, thanks for reaching out. The difference between the yellow and black SumoSprings is the weight capacity or stiffness of the spring. For the 2018 Ram ProMaster 1500, the black ones part #SSR-307-47 are 1,500 lb capacity. Those are good for…

view full answer...

Answer 10

Hey Paul, thanks for the pic! That's a nice setup. It is highly recommended to use a weight distribution system if your trailer weighs 50% more than your truck's total weight and you are definitely there. For a 4,000 lbs cargo trailer, I…

view full answer...

Answer 11

Hey Steven, We do have a custom 5th wheel base rail kit for your 2020 Ram 1500 that will not require any drilling into your truck's frame, and the correct part number for that is the following: - Curt Custom Fifth Wheel Installation Kit for Ram…

view full answer...

Replacement Gas Strut for 654150 0550N 091/16

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching