Brake Assemblies For 3,500Lb Surge Brakes That Allow For Backing Up Without a Reverse Lockout
Published 10/16/2021
Products Featured in This Question
Question:
will these drums work if the actuator does not have a reverse lockout?
asked by: Brian C
Expert Reply:
Yes, The Dexter Trailer Hub and Drum Assembly # 84546UC3-EZ will work with brakes that do not have a reverse lockout but do know that the hubs have no control over the brake activation on your trailer. You need the brake assembly for that.
The Hydraulic Trailer Brake Kit # AKUBRK-35 or Hydraulic Trailer Brake Kit # AKUBRK-35-D (for boat trailers) will allow for the brakes to activate when backing up if you do not have a reverse lockout on your brake actuator.
The Hydraulic Trailer Brake Kit # AKFBBRK-35 or Demco Hydraulic Brake Kit # 40716-15 (for boat trailers) are free backing. This means that when you are backing up and your brake actuator is trying to activate the brakes the brake pad will fall away from the brake drum allowing you to back up. The brake pads are only designed to fully engage when moving in a forward direction. You may experience a light drag when backing up as the pads fall away.
Product Page this Question was Asked From
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: disc brakes trailer brakes
- Search Results: 7 pin trailer plug
- Shop: Trailer Wiring
- Video: Review of TowSmart Custom Fit Vehicle Wiring - Trailer Hitch Wiring - TS37QR
- Shop: etrailer Hydraulic Trailer Brakes - Uni-Servo - 10" - Left/Right - 3.5K
- Shop: etrailer Hydraulic Trailer Brakes - Uni-Servo - Dacromet - 10" - Left/Right - 3.5K
- Video: EZ Connector Magnetic 7-Way Trailer Connectors w/ Watertight Seal Feature Review
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: Tracker Boat Trailer Wires With 7 Wires Connecting Into A 4 Pin Plug
- Shop: RV Designer RV Socket Adapter Harness - 4 Way Flat to 7 Way RV
- Video: Checking Out the Kodiak Hydraulic Brake Line Kit
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
- Search Results: hydraulic brake line
- Search Results: trailer brakes
- Q&A: Trailer Taillight Kit for Tracker Boat Trailer
- Q&A: Wiring a 7-Way Connector for a Trailer With Surge Coupler
- Q&A: How To Wire A 7-Way Trailer Connector With A Wishbone Trailer Wiring Harness
- Q&A: Replacing a 4-Way Connector with 7 Wires on a 2007 Tracker Trailstar Boat Trailer
- Q&A: Brake Hub/Drum Is Stuck And Cannot Be Removed From Spindle - What Can I Do?
- Q&A: Wire and Function In A 7-Way Connector To Allow Brakes To Release When Backing Up A Boat Trailer
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: 25 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 25' Ground
- Shop: 7-Pole Blade to 5-Pole Flat Connector Wired Trailer Adapter - Coiled Cable - 66" Long
- Video: etrailer Hydraulic Trailer Brake Installation
- Video: Let’s Check Out the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout
- Video: Detailed Breakdown of the Optronics Wishbone 4-Way Trailer Wiring Harness
- Search Results: dico actuator
- Search Results: dico