Search: hydraulic brake line   >  

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

Hey Dixie, yes the Kodiak disc brake line kit part #18SI-BLKIT is perfectly compatible with the DeeMax Disc Brake Kit part #DE62FR.

Hey Dan, the only difference between the Hydraulic Trailer Brake Kit #AKUBRK-35-D and the Hydraulic Brake Kit #AKFBBRK-35-D is that #AKFBBRK-35-D is free backing which lets you reverse your trailer without the brakes being actuated by the actuator…

The correct stainless steel guide bolt for your #T2HRCM10DAC is the Replacement Guide Bolt for Kodiak Calipers - Stainless Steel #KGBS.

Hello Darren. Thanks for reaching out, I can definitely help with this. To convert your 2024 Brinkley Z2900 5th wheel over to disc brakes, you will need a disc brake kit, a brake line kit, and electric over hydraulic actuator, and a breakaway kit for…

Hey David, The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX56FR accepts brake lines with 3/16" male inverted flare fittings with a 3/8"-24 thread size like the DeeMaxx Hydraulic Brake Line #DE38GR.

The Hydrastar Disc Brake kit part #HSE7K-T1SO would be the correct place to start as this is a slip-on style rotor like you are wanting and comes with the best actuator out there. Then for idler hubs that would fit behind these you'd also need…

I do have a possible solution for you, however there is not going to be an option to upgrade only the housing and fan you'd have to do a complete swap. With that being said, a great upgrade for your discontinued Dometic EZ-Breeze is the…

We have just what you are looking for. The brake I recommend is part #AKFBBRK-35L-D. This is a 10-inch brake assembly that is 2-1/4 inches thick and has an aluminum wheel cylinder. This assembly is designed for 3,500-lb axles and will work with 13,…

Yes, the etrailer #e67ZR tow bar is made for etrailer by Demco in the USA and has a lifetime limited warranty by etrailer. Demco parts will work on this tow bar, but Demco has no responsibility for warranty, repair, or service - you would need to go…

For as trashed as those brake assemblies are I am impressed with how spotless that spindle is! Based on the bearing numbers you mentioned you have a #84 spindle and the hub part #AKHD-545-35-G-K is correct. Since this its galvanized it's a really…