Replacement Solera Awning Drive Head Options

Question

Question:

i need the power drive head cover for solera power awning off my 2019 coachman chapperal 391 qsmb. it is not a speaker head. i parked the camper back home last night and saw it was missing. i need the part number to order. also it looks like there are no screws that come with it- need direction on that

asked by: Steve L

0

Expert Reply:

I am not totally sure which Solera awning setup you have but we do have a few options you can check out and see which one matches what you need. We have the part # LC643922, # LC289560, and # LC32NJ.

expert reply by: Jameson C

0

Greg

8/2/2024

I am looking for a black front drive cover for a solera 2000 series 12v power awning that is missing from my Coleman 202RD 22024 camper also does it come with grommet? thanks

Jameson C.

8/4/2024

@Greg The 2000 series is also the Edge so for a replacement drive head cover you would want the part # LC32NJ.

Answer 1

Hi Tony! They are indeed! You are looking for the Replacement Front Cover for Solera Power RV Awnings - Regal Idler Head - Black #LC643923 and Replacement Back Cover for Solera Power Awnings - Drive Head or Idler Head - Regal Style - Black #LC643921.…

view full answer...

Answer 2

Hey Steve! Since the #LC643923 is the Regal-style idler head you need the Replacement Front Cover for Solera Power RV Awnings - Regal Drive Head - Black #LC643922 for the other side. What happened to your awning?

view full answer...

Answer 3

Hey Justine, thanks for reaching out! You'll either have a standard head system or the Regal head system on your Solera 3000 awning. The following is what you need to choose from: Standard Idler Head Cover - White #LC289563 - Black #LC289566…

view full answer...

Answer 4

Hello Mandy, thanks for writing in. On the Solera powered awning they have to main style covers. One of them is the Regal Style and the other is the Plain style. In order to determine which one you have you will want to look and see if it has the…

view full answer...

Answer 5

Hi Diane! There are two styles that you could have on your 3000 Series Solera Awning. I have a picture linked to show the difference and both options listed as well. If you aren't sure, send your pictures to [email protected] and I can…

view full answer...

Answer 6

We do offer replacement covers for the heads of the Lippert Edge awnings. For the drive head, you'd want the #LC32NJ cover you'd looked at and for the idler head, use part #LC37UD.

view full answer...

Answer 7

I'll go ahead and list out all the replacement black rear head covers for Solera power awnings, and you can scroll down to see photos of them to compare to yours. Just note that some are a replacement specifically for the drive head and some for…

view full answer...

Answer 8

I attached a picture of what the wax screws look like for the Solera awnings like of the #LC289561 instructions that you referenced. Basically it's under the black cap that you'll pop off and you'll unscrew that you see in the second…

view full answer...

Answer 9

The wax screw you're referring to I believe is a #8 - 32 x 1/2”.

view full answer...

Answer 10

The replacement plug/grommet you are looking for is the Replacement Manual Override Grommet for Solera Powered RV Awnings #LC95ED. So this will be what you need to fill the hole in your awning head (even though the replacement drive head cover really…

view full answer...

Answer 11

The correct screws for the Solera Awning Plain Drive Head #LC289561, are #6-15 UNF x 1/2”.

view full answer...

Answer 12

In order to separate two awning head covers such as the Solera Awning Plain Drive Head Front Cover part #LC289560 and the Solera Awning Plain Drive Head Back Cover part #LC289561 you'll need to remove the screws which are accessed from the back…

view full answer...

Replacement Solera Awning Drive Head Options

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching