Installation Instructions For Furrion Heat Strip Being Install In Furrion Chill 15,500 BTU A/C

Updated 09/29/2021 | Published 09/28/2021

Question:

Can you help provide me a video on how to install the furrion heat strip onto my Furrion 15.5 Furrion ac unit ? Thanks

asked by: Barry N

Expert Reply:

I wish we had an install video for the Furrion Heat Strip # FR35SR being installed into the 15,500 BTU Furrion Chill RV Air Conditioner # FAC1511MA-W but we do not.

While Furrion does not offer online instructions we have reached out to them in the past to get a copy and here is what it says: you will need to remove the 10 screws holding the top cover on, remove the EPP top cover of the evaporator, align the 4 bolts of the heat strip with the evaporator and use provided hardware to bolt heat strip to evaporator, route the harness down through the air intake vent, remove the 3 screws from the electrical control box and remove the covers and controls, plug black wire from harness into H pin on switch, install white neutral wire in junction box with other neutral wires, install 3 pin connector into reserved opening on electrical control box, reinstall 3 screws for electrical box, plug in 3 pin connector from heat strip to new installed 3 pin connector in electrical box.

There is also a copy of the written instructions included in the box.

I included a video review of the # FR35SR for you to take a look at.

expert reply by: Samuel C