Installation Instructions for Furrion Heat Strip Add-On

Updated 12/07/2020 | Published 12/04/2020

Question:

Are the installation instructions available for item FR35SR - Furrion heat strip?

asked by: Robert W

Expert Reply:

I reached out to my contact at Furrion and there are not online installation instructions that they could provide for the Furrion Heat-Strip Add-On # FR35SR that you referenced. The instruction manual is included in the box when you purchase the heat strip.

I had our warehouse pull the installation instructions and to complete the install you will need to remove the 10 screws holding the top cover on, remove the EPP top cover of the evaporator, align the 4 bolts of the heat strip with the evaporator and use provided hardware to bolt heat strip to evaporator, route the harness down through the air intake vent, remove the 3 screws from the electrical control box and remove the covers and controls, plug black wire from harness into H pin on switch, install white neutral wire in junction box with other neutral wires, install 3 pin connector into reserved opening on electrical control box, reinstall 3 screws for electrical box, plug in 3 pin connector from heat strip to new installed 3 pin connector in electrical box.

I included a video of the Furrion Heat Strip Add-On for you to take a look at.

expert reply by: Samuel C