Is There A Pin Adapter That Switches A 4 Pin Circuit Board To A 10 Pin Circuit Board

Updated 09/30/2021 | Published 09/27/2021

Products Featured in This Question

Replacement Circuit Board Adapter Plug for Dometic Atwood Water Heaters - 10 Pin to 4 Pin

(4)

$14.56

Question:

I have an old Atwood gas/electric water heater. Works on electric only. One of your experts said they dont make my circuit board anymore, but I needed a 91365.I got one off eBay but it has the 10 pin deal, and my plug is a 4 wire only. Can I get an adapter to go from my 4 wire plug to connect and work on the 10 pin tang. They sent a piece that plugs in the board, maybe a 92074 adapter piece? I was able to plug the 4 wire plug on left side of this 10 pin deal but nothing happened.

asked by: Dave

Helpful Expert Reply:

I spoke with a Dometic representative and they do have pin adapters for this specific situation. When Atwood switched to a 10 pin circuit board from 4 pin, they started carrying pin adapters for that specific purpose. The part you need is the Replacement Circuit Board Adapter Plug for Dometic Atwood Water Heaters - 10 Pin to 4 Pin, part # DMC47FR. This will allow you to connect your new circuit board to your 4-pin wire plug,

expert reply by: Mark Smith