How Do You Reset the Progressive Dynamics Converter # PD9260C?

Question

Question:

Trying to find a way to reset the unit

asked by: Garycase

0

Expert Reply:

I reached out to my contact at Progressive Dynamics, and he confirmed that there is no factory reset setting button on the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger # PD9260C. However, he recommended that you unplug it from the wall outlet and remove the dc wires. Once the wires are removed, you will then need to reconnect the dc wires and plug it back in. This should reset the converter.

expert reply by: Bob C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 4

Hey Lucian! There are definitely a lot of options out there, and the best is usually a mix of parts from different manufacturers. We don't have a package under a single part number but I can give you a list of parts for a complete setup. I…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 8

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hi Mike! The Big Truck Big RV Trailer Jack Foot Scale #BTBRV014 is compatible with A-frame jacks that have a 2" inner tube and a removable/interchangeable foot. As long as that matches your Lippert jack you will be able to use this scale with…

view full answer...

Answer 11

Hey Tom, great question! Both products provide an easy way to measure tongue weight, but they excel in different situations. The BTBRV Trailer Jack Foot Scale #BTBRV014 measures tongue weight at the trailer jack, so you don't need to position a…

view full answer...

Answer 12

Happy to help Chad, thanks for reaching out! The K-Source Universal Dual Lens Towing Mirrors #KS3990 are the best option for the Grand Cherokee. It uses a ratcheting strap system that tends to stay tighter and vibrate less than basic strap on…

view full answer...

How Do You Reset the Progressive Dynamics Converter # PD9260C?

Featured Help Information

Miscellaneous Media

Continue Researching