How To Install The Pace Edwards Switchblade Retractable Hard Tonneau Cover

Updated 09/07/2021 | Published 09/05/2021

Question:

Are these hard to install and do you have video instructions?

asked by: Mike

Expert Reply:

We don't have any video instructions for the Pace Edwards Switchblade Retractable Hard Tonneau Cover # 311-SWDA24A55 unfortunately. That being said installation is fairly easy and after the initial installation can be easily taken down and reinstalled for large loads that require the full length of the bed.

You'll first need to position the canister in the truck bed and ensure that it's centered in the bed. Next you'll install the rails which will bolt to the canister and clamp to the bedrails of your truck. Once that is completed you can attach the pull strap to the clamps on either the left or right side near the tailgate. Next you'll install the kickstands on the clamps and tighten them into place with the wingnuts. From there you'll then lubricate the wiper seals and pull them into place and then install the drain tubes. After that you'll attach the top cover to the canister using four screws and attach the Velcro strip to the underside of the bedrail in your preferred location to easily access the pull strap.

expert reply by: Kevin C