How Low Below Door Does Westin Nerf Bar # 21-53565 Install

Question

Question:

How far do they down from bottom of door.

asked by: Brian

0

Expert Reply:

We don't have a way to get you that exact figure but I attached a picture that shows the Westin steps part # 21-53565 installed and you can see the clearance to get an idea.

expert reply by: Jameson C

0

Bars Installed
(click to enlarge)

Answer 1

Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…

view full answer...

Answer 2

Congrats on the new truck! The Curt RockerBall Multi-Fit Ball Kit item #C78ZV will work great with the puck system in your new 2025 Sierra 2500. It's been specifically designed to work with all the OEM puck systems so the difference in…

view full answer...

Answer 3

None of the options for the prep package are specifically designed to add height. Depending on the ball you have now you might be able to get a little more height out of the B&W Ball and Safety Chain Kit #BWGNXA2061. The installed height of this…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Hey Jeff! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR97MV comes with a Demco eZ-Latch. The best option for a lock is the InfiniteRule Lock for Cast Demco eZ-Latch Trailer Couplers #IR66FR. This is designed to for a standard coupler but…

view full answer...

Answer 9

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 10

Hey Bob, you can use the Curt RockerBall Multi-Fit Ball Kit w/ 4" Offset #C78ZV with a Gen-Y fifth wheel to gooseneck adapter like it sounds like you have currently. This will give you an additional 1-1/2 inches of height like it sounds like you…

view full answer...

Answer 11

Welcome back John! I'm going to need a bit more information to confirm the MORryde GooseTech item #MR57MV is the correct one. I checked with the manufacturer and your 2024 Dutchman Astorian 230ML 5th wheel trailer comes standard with a Curt…

view full answer...

Answer 12

Hey Adam, welcome back! Yes, the Roadmaster Comfort Ride Shock Absorbers can be installed without the leaf spring kit. Is this still for your 2013 CrossRoads Elevation TF-3612 with tandem 7k axles? Assuming it is, the #RM-2460 is the kit you need for…

view full answer...

How Low Below Door Does Westin Nerf Bar # 21-53565 Install

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching