Is The 7" Furrion Camera Monitor Compatible With The 4.3" Monitor Furrion RV Back Up Camera System

Question

Question:

Bought a 4.3 camera will a 7 inch pair with the camera

asked by: John

0

Expert Reply:

Yes, the 7" Monitor for Furrion Vision S Wireless RV Camera System # FR47FR will pair with the camera on your Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF. This will also allow you to add three more cameras to your system since the 7" monitor will allow up to 4 cameras.

You can add on side marker cameras # FCE48TASL to improve visibility and obstacle detection for your RV or camper and/or an extra camera # FCN48TASF above your door or to the front of your camper for easier hookup.

If you wire you cameras to the running lights you can have them on all the time instead of only when in reverse. Most people wire them this way to use as a security camera while at the campground.

expert reply by: Kevin C

0

Answer 1

Hello Patrick, Great question. You do not need to use a primer on a brand new Superflex TPO roof membrane like the Alpha Systems #AL83CV when applying lap sealant. As long as you’re using a sealant that’s compatible with TPO, it’s designed to bond…

view full answer...

Answer 2

The Alpha Systems Superflex TPO RV Roof Membrane #AL23CV comes on a roll. This can be seen in the photo below as well as the photos on the product page. This is also available in white #AL42CV, gray #AL75CV, and almond #AL33CV.

view full answer...

Answer 3

Hey Jairo. So we do not offer a direct replacement for the Norcold N611, but we do have a good replacement option for you. It really comes down to what will fit in your cutout space. Take a look at the Norcold RV Refrigerator w/ Freezer - 8.2 cu ft -…

view full answer...

Answer 4

Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…

view full answer...

Answer 5

Thanks for your question, Richard. I see you were looking at the Voyager WiSight 2.0 Wireless Backup Camera System for Prewired RVs #ASA24YR. One thing to keep in mind is that Voyager uses a different plug and mounting style than Furrion. So if your…

view full answer...

Answer 6

Hey Tom, at this time Furrion does not have any alternate mounting methods or options for the monitors of their systems like the part #FR39DF that you referenced. If you have an idea for one that you can come up with like you mentioned that would…

view full answer...

Answer 7

Hi Scott, That’s a smart question to ask before you pull anything apart. Good news, the Vision S+ side cameras in the kit part #FR64AD are designed to use the same style marker light base and wiring as the original Vision S system. If your fifth…

view full answer...

Answer 8

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

view full answer...

Answer 9

Hey Clark! We didn't have the version with the 5" screen so I went ahead and added it to our site for you. For the standard system we have the Furrion Vision S+ Wireless RV Backup System w/ 1 Camera - 5" Screen #FR39DF. If you want the…

view full answer...

Answer 10

Hello Loren, Congrats on the new Chevy 3500! What’s your favorite feature so far? We have a Furrion camera system that’s ready to plug into the pre-wired mount on your Grand Design Reflection 273MK, but it will require a second monitor in the cab of…

view full answer...

Answer 11

The biggest issue we see with the Furrion Vision S Wireless RV Backup Camera Systems like part #FOS43TASF comes from the wiring on the vehicle side, the running light circuit in particular. If it's less than 12 volts then the camera won't be…

view full answer...