bing tracking image
Q & A Icon

Determining If Kodiak Disc Brake Kit K2HR526DS Fits 2012 Ez Loader AB 21R 3700 Single Axle Trailer  

Updated 08/06/2021 | Published 08/05/2021

Question:

Hi, I have a 2012 ez loader model # AB 21R 3700. 5000 GVR. Single axel 6bolt on 5 1/2 . Also Kodiak 225 calipers and 11.6 dia. Reliable hub / rotor . I think I need your K2HR526DS KIT, pads s.s and oil bath kit # XLPROLUBE 2440 kit My questions:. Will the 12inch rotor / caliper assy. Fit with my aluminum wheels. I currently have .6 clearance between the caliper and wheel. Any help will be greatly appreciated . Also looking at new brake lines and a reverse lockout solenoid. Thank you

0

Expert Reply:

I would be happy to help you confirm that the Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet and Stainless - 6,000 lbs # K2HR526DS will fit your 2012 Ez Loader Model AB 21R 3700 with a 5000lb GVWR, but to do that you will need to confirm the bearing combination of your current hubs.

The easiest way to do this is by removing one of your current hubs and looking for the bearing numbers stamped in the face of each bearing as shown in the included picture of the # L44649.

If your bearings are worn to the point that you can no longer read the bearing numbers you will need to use digital calipers # PTW80157 to precisely measure your spindle in the locations shown in the included diagram.

The # K2HR526DS you were looking at uses inner bearing # 25580 and outer bearing # 15123. If this matches your bearing combination this would be a great option for you.

This kit works with wheels that are at least 15" in diameter, so as long as that is what size your wheels are they will work perfectly.

For a new brake line kit I recommend the # 18SI-BLKIT, and for the replacement reverse lockout solenoid you will need the # T4748800.

I included videos of the products mentioned for you to take a look at.

expert reply by:
0
Samuel C
Bearing Number Stamped In The Face Of Bearing
Bearing Number Stamped In The Face Of Bearing
(click to enlarge)
Where To Measure Spindle To Determine Inner and Outer Bearings
Where To Measure Spindle To Determine Inner and Outer Bearings
(click to enlarge)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>