Does the Dometic Part-Timer RV Toilet Come With All Mounting Hardware

Question

Question:

Does this toilet come with the flange seal kit and bone colored china caps with mounting hardware? It shows everything in the pictures.

asked by: Bryan

0

Expert Reply:

Yes, the Dometic Part-Timer RV Toilet # DOM37FR comes with all of the mounting hardware including the lower seal (gasket) and bone tan caps.

expert reply by: Scott S

0

Answer 1

It sure would Irene! The Dometic 411 RV Toilet item #DMC84JF would indeed be a good replacement for a Dometic 301 like item #DOM24FR. It's going to install the same way and match your current toilet flange. It'll drop right onto the flange…

view full answer...

Answer 2

Hey Rick, The clear version of the Amber Oval Lens #APLL11AB is no longer available on it's own, but if you get the LED Porch and Utility Light for RVs #RVPLL11CB you'll get the whole the light assembly and the clear lens.

view full answer...

Answer 3

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 7

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 8

Hey Jeffrey, the Dometic RV toilet part #DMC44JF is designed to fit toilet applications with a 7-5/8 inch rough in measurement which is the measurement you took. Since your current setup has 10-1/4 inches this would work with space to spare. What…

view full answer...

Answer 9

Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…

view full answer...

Answer 10

Hey Matt, the Power 310 part #PM42VR is the same as a Dometic 310 but the Dometic 410 #DMC44JF is considered to be a higher end nicer toilet by offering a deeper bowl, a taller 18-inch seating height, and a, elongated, "space-saving"…

view full answer...

Answer 11

Thanks for reaching out George, happy to help! The Dometic 410 series toilets #dmc44jf are designed as replacements for the 310 series models and use the same general rear water supply connection. While the exact valve position can vary slightly due…

view full answer...

Does the Dometic Part-Timer RV Toilet Come With All Mounting Hardware

Featured Help Information

Miscellaneous Media

Continue Researching