Replacement Electric Fan Lift Motor For Fantastic Fan With 6051-05 Lift Motor

Question

Question:

I have the following 200-532A 17.1 RPM 12 VDC P/N 6051-05 Autotrol Corp Crystal Lake, IL What is the replacement? Do you have it? Thank you

asked by: Mike G

0

Expert Reply:

The Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents # FVK6010-80 is the correct fan lift motor for your 6051-05 lift motor. If your fan was manufactured before 2014, this motor will still work, but you will need to cross the wires. So red to black instead of red to red and black to black on the 2014 or newer motors.

expert reply by: Bud M

0

Answer 1

I was able to determine that your Lippert axles are 3,500 lb capacity axles so the Roadmaster Comfort Ride Shock kit you'd want would be the part #RM-2450.

view full answer...

Answer 2

Hello Timothy. The correct replacement for your Fan-Tastic fan lift motor pn 6050-05 will be item #FVK6010-80. According to our contact at Fantastic Vent, since your motor is of a lower RPM and made before 2014, the #FVK6010-80 motor will still work,…

view full answer...

Answer 3

The only place I can find information on the 200-0535a is on ebay so it appears this is an aftermarket part and is likely not the most reliable. Since many of the Fantastic lift motors have the same shape I would need to know exactly what model vent…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…

view full answer...

Answer 9

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 10

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 11

Hi Chas, The Lippert Road Armor Shock Absorbing Equalizer part #LC53CK may work for your trailer, but that will depend on what equalizer is currently on your trailer. In order to determine what equalizers would be a fit for your trailer, we'll…

view full answer...

Answer 12

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Replacement Electric Fan Lift Motor For Fantastic Fan With 6051-05 Lift Motor

Product Page this Question was Asked From

Continue Researching