Fit of Lippert Tailgate Storage System on 2021 Grand Design Image Travel Trailer  

The brackets part #LC373965 that you referenced basically either bolt around or weld to the bumper support beam on the RV. I attached a picture that shows them welded but you could also drill holes in the bumper and use included hardware to secure…

When installing the Installation Hardware #LC373965 you do not need to drill. The hardware bolts over the frame like you mentioned.

The Lippert Components Flip Down Slotted Bike Rack Tailgate Storage System Item #LC243621 has an length of 70-1/2" so you would need to have a frame distance of 71" to install this on the I-beams with the Lippert Tailgate Storage System…

I have attached a photo for you with all of the dimensions I have for the Installation Hardware for Lippert Components Tailgate Storage System part #LC373965. If you need something that is not listed just let me know and I can go out to our warehouse…

Yes, the Lippert Components Flip Down Slotted Bike Rack Tailgate Storage System part #LC243621 uses the same mounting brackets as the Lippert Components Tailgate Storage System.

It sounds like you might have the Lippert Flip Down Storage Rack and if that's the case I do have an option for you but we don't have any bike rack accessories or attachments for this. That said, the storage rack you have now actually uses…

The Installation Hardware #LC373965 is designed for the Lippert Components Flip Down Slotted Bike Rack Tailgate Storage System #LC243621, while the Lippert Tailgate Storage System Mounting Kit #LC432336 is for the Lippert Components Tailgate Storage…

The brackets part #LC373965 that you referenced basically either bolt around or weld to the bumper support beam on the RV. I attached a picture that shows them welded but you could also drill holes in the bumper and use included hardware to secure…

The Lippert Tailgate Storage System Mounting Kit part #LC432336 which is what you will need to use to install the Lippert Components Flip Down Slotted Bike Rack Tailgate Storage System part #LC243621 is compatible with I-beam frames. I have attached…

The brackets part #LC373965 that you referenced of the kit part #LC243621 basically either bolt around or weld to the bumper support beam on the RV. I attached a picture that shows them welded which is what you saw in the install video but you could…

The Lippert Components Flip Down Slotted Rack Tailgate Storage System #LC243621 does require a hardware kit to install. If you want to attach it to the top of your RV bumper you need the part #LC432336.

The Lippert Tailgate Storage System Mounting Kit part #LC432336 attaches to the frame which you can see below. Therefore, so long as the wall does not extend past the frame rails too much it should work. The included diagrams below should help to…