Yakima Pull Pin Replacement for Yakima OnRamp Bike Rack

Question

Question:

I just bought a Yakima OnRamp rack and it did not comp with a safety pull pin. Dealer was no help. Do you know which pull pin works for this rack? Would it be: 8880153 Yakima Replacement Pin for Hold Up Plus 2 Bike Rack Adapter?? Thank you!!

asked by: TOM D

1

Helpful Expert Reply:

For the Yakima OnRamp bike rack # Y36FR the correct replacement pull pin is the part # 8880530.

expert reply by: Jameson C

1

Answer 1

The correct replacement hitch pin for a Yakima OnRamp bike rack #Y36FR is the part #Y8890200 and then for the locking core for the end of it you'd need the part #Y07235 and you'd be set.

view full answer...

Answer 2

The wires on your Curt LED light kit #C53201 are as follows; Brown - Running lights Yellow - Left turn Green - Right turn White - Ground So the Brown wire will splice to the Red wire on the license plate holder #TH35JV . The Black wire is your…

view full answer...

Answer 3

The Thule License Plate Holder part #TH35JV only uses the running light circuit and ground circuit for wiring. So if you were to run taillights onto your bike rack as well you'd need to splice the #TH35JV into the brown wire and white wire of the…

view full answer...

Answer 4

Hello Nelson, thanks for reaching out. Typically I would not recommend modifying new products like that, but if you are comfortable doing that kind of work, it would be possible to Thule Plate Holder #TH35JV into the Yakima Light Kit #Y74VR. For the…

view full answer...

Answer 5

Hi Frank, I reached out to Yakima and they stated that the Yakima OnRamp LX Bike Rack #Y88DJ uses a different ramp than the original #Y99KR. They are working on getting it available as a separate part but it could be a bit for it is.

view full answer...

Answer 6

Thank you for all of the details and photos! For your application I recommend using the Thule License Plate Holder for Bike Racks #TH35JV along with the 6' Long Roadmaster Extension Loop #RM-300150-00. This gives you exactly what you're…

view full answer...

Answer 7

Hi Kevin; the Yakima OnRamp LX #Y88DJ you purchased can use the License Plate and Tail Light Relocation Kit for Yakima EXO System #Y74VR. This fits both the EXO and the OnRamp LX.

view full answer...

Answer 8

To add lights and a license plate holder to your Swagman E-Spec Bike Rack for 2 Electric Bikes #S94FR you'll need the Thule License Plate Holder for Bike Racks #TH35JV and Curt Auxiliary LED Indicator Lights #C53201. The lights come with a 3M…

view full answer...

Answer 9

The wiring of the Thule License Plate Holder part #TH35JV is designed to attach to a trailer wiring 4-way. So for your 2023 Lexus NX 250 you would want the part #C59236 if you did not have that already.

view full answer...

Answer 10

I would be happy to help! To install the Optronics LED Trailer License Plate Bracket #LPL55CB on your 2018 Subaru Outback Wagon and power it through your current trailer connector you will just need to get a trailer end 4-way connector #18004. You…

view full answer...

Answer 11

Hey Joseph! The Thule License Plate Holder for Bike Racks item #TH35JV uses a 4-way connector to power the lights. Since you've got a 7-way there are two options you can use. If you're going to be using your 7-way connector along with your…

view full answer...

Answer 12

The pin that you're wanting for your older version of the Yakima HoldUp bike rack is part #Y8880153. This will give you that second pin to help keep the trays in the folded position while you're heading down the road. The Pull Pin #8880530…

view full answer...

Yakima Pull Pin Replacement for Yakima OnRamp Bike Rack

Products Featured in This Question

Continue Researching