How To Help Stop Bouncing While Towing With a 2020 Ford F-150

Question

Question:

I have a 2020 F150, 3.5 Ecoboost, FX4, max towing package installed. I have upgraded my tires to Cooper AT3 XLT. I also use a Hensley Hitch to assist with sway and weight distribution. I am trying to minimize the bounce of the truck/trailer when going over bumps and dips in the road. I have been looking at this product, the Timbren Rear Suspension Enhancement System Item # TFR1504E, or upgrading the rear shocks. Which direction would you recommend? I am towing a 2021 Surveyor Legend 203RKLE with about 600 pounds tongue weight.

asked by: Ryan

0

Expert Reply:

The best option we can offer to help cut down on excessive bounce while towing is with the SumoSprings Solo Custom Helper Springs part # SSR-117-47. The SumoSprings will do a great job of helping to reduce road shock while towing or hauling. They provide support as they but due to the softer material, they have a smoother ride with less bouncing than say the comparable Timbren Rear Suspension Enhancement System part # TFR1504E.

expert reply by: Conner L

0

Answer 1

The main difference between SumoSprings part #SSR-117-47 and Timbrens part #TFR1504E for a 2017 Ford F-150 is ride quality and support. The Timbrens are stiffer so they provide more support but this also means there is not as much give so the ride…

view full answer...

Answer 2

The rear suspension enhancement system I highly recommend for your 2020 Ford F-150 is the Timbren Rear Suspension Enhancement System #TFR1504E because these jounce springs will improve your truck's handling and performance, offering your…

view full answer...

Answer 3

The difference in the Timbrens for your 2023 Ford F-150 is that the #TFRTT1504E is very stiff and designed only for things like trucks that have a salt spreader or truck bed camper on them - basically if there is constant weight on the suspension.…

view full answer...

Answer 4

Yes; when using a weight distribution hitch while towing with your 2019 Ford F-150, using the Timbren Rear Suspension Enhancement System #TFR1504E will help with stability. The weight distribution will help with leveling, but the Timbrens are going…

view full answer...

Answer 5

Yes, you'll need to readjust the weight distribution system after installing the Timbren Rear Suspension Enhancement System part #TFR1504E on a 2021 Ford F-150. The reason for this is because the rear end sag will be reduced with the springs so…

view full answer...

Answer 6

Hey Dave, The Timbren Rear Suspension Enhancement System #TFR1504E you referenced is a fit for your F-150, but it has a 6,000lb capacity so it'll give you an terrible ride unloaded ride quality. These would be great if you're heavy hauling…

view full answer...

Answer 7

To install the 7-1/2 Inch Round Butterfly Vent, #371800, you will need to drill or cut a hole in your trailer that is 5-7/8 inches diameter to no more than 6 inches diameter. If you have access to a hole saw this size for a drill the wold be the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

How To Help Stop Bouncing While Towing With a 2020 Ford F-150

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching