Keystone Cougar Gearbox Venture ADTH Replacement

Question

Question:

Hi , Got a venture/adth landing gear gearbox and motor E226168 Fifth wheel 10098702 What is the best replacement part for this ? Thanks!!

asked by: Lukas G

0

Expert Reply:

For your Venture ADTH landing gear the best replacement gear box would be the Stromberg part # LG-179015 that you referenced. This is the heavier duty aluminum replacement option that would last longer than other similar options.

expert reply by: Jameson C

0

Answer 1

It seems like you have the ADTH 1RV-200 Motor which has a capacity of 6,500 lbs. You can use this replacement motor #LC142178 which has a 4" on center mounting hole spacing. This one is a bit heavier duty than your other which could prevent it…

view full answer...

Answer 2

Given the issue you described and the fact that you have done a good job of troubleshooting and checking other potential sources for the issue, it sounds like the motor is going bad. Since you mentioned the landing gear working fine for a little bit…

view full answer...

Answer 3

For your Venture landing gear you can use #LC276602 or #LG-179015. Either one will work.

view full answer...

Answer 4

Hey Johnny, thanks for reaching out! I highly recommend using the Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor #LC196308 as a replacement for your 8532-07 motor. According to my research your motor is rated for 5,500 lbs so this motor will…

view full answer...

Answer 5

What you described is definitely a bad gear box on your Venture landing gear. So what you'll need is the replacement gear box part #LG-179015 and you'd be set! If you ever need to replace the motors too they are part number #LG-142178.

view full answer...

Answer 6

Atwood was sold to Dometic a few years back and replacement parts for older landing gear are scarce. We do still have Stromberg Carlson Landing Gear repair kit for the follow jack that will fit, part #LG-146060. For a lead jack repair kit use…

view full answer...

Answer 7

We have just what you need to replace your landing gear motor M9000PK with the #LC196308 and you'd be set! This is a confirmed fit for what you have and is a faster motor too so your jacks will raise and lower quicker.

view full answer...

Answer 8

The correct replacement for your 1-065-041012-01 motor is part #LC141893 from Lippert. Your original motor had a 7140 rpm speed. The Stromberg-Carlson #LG-196308 you specified has a 5430 rpm output, so it wouldn't be a good choice. You'll…

view full answer...

Keystone Cougar Gearbox Venture ADTH Replacement

Product Page this Question was Asked From

Continue Researching