Replacement Motor for RV Step with Part Number 10312040

Question

Question:

Kwikee motor replacement just motor 02 Monaco windsor

asked by: Randy B

0

Expert Reply:

The replacement Replacement Motor with Mounting Plate for Kwikee Electric RV Steps part # LC379608 is what you need to replace the 10312040 motor on your Monaco.

expert reply by: Jameson C

0

Answer 1

To replace the gear and motor on a Kwikiee Series 32 step you will need the Replacement Gear Box and A Linkage for Kwikee Electric RV Steps #LC379160 and the motor #LC379147.

view full answer...

Answer 2

We have exactly the motor you are looking for. If your Kwikee 32 Series Steps were produced between 2000-2005 you will need the Replacement Motor with Mounting Plate for Kwikee Electric RV Steps #LC379608, and if your steps were produced from…

view full answer...

Answer 3

There is no specific torque rating for shackle bolts. You'll want to ensure that the bolts you use are long enough so that when installed you will have at least 2 threads protruding from the nut. Make sure that the bolt you're using has a…

view full answer...

Answer 4

IMGL when referencing the Kwikee steps stands for Integrated Motor Gear Box Linkage. In October of 2004, Kwikee Steps made by Lippert changed their system from the separate parts to the integrated system. Prior to this there was a cast linkage…

view full answer...

Answer 5

I did some research, and yes, the Replacement Gear Box and A Linkage for Kwikee Electric RV Steps #LC379160 you mention, will work for your Kwikee 32 Series Steps. The curved arm piece you're looking for isn't available separately,…

view full answer...

Answer 6

Because of the age of the steps I can see why they might have made this mistake; the #LC379147 they got you is usually the correct motor replacement for older Kwikee steps, but I do believe you've got pre-IMGL steps. The #LC379147 are designed…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Replacement Motor for RV Step with Part Number 10312040

Product Page this Question was Asked From

Continue Researching