Where Do the Frame Hanger Brackets for the Curt TruTrack Weight Distribution System Get Installed

Updated 06/18/2021 | Published 06/17/2021

Question:

How far down the frame from the center of the ball can you mount the hardware for the bars.

asked by: Ronald T

Helpful Expert Reply:

In regards to the Curt TruTrack Weight Distribution System part # C17500, the frame brackets will need to be mounted 4" in from the end of the spring bar. I don't have an exact measurement on the frame but if you take the length of the spring bars and subtract the recommended position then you can get an estimate of 31".

expert reply by: Conner L