Video Transcript for Review of CURT Replacement Adjustable Support Brackets - C52RV

Hi everyone. Steve here with etrailer.com. Let's take a look at our replacement adjustable support brackets for the Curt TruTrack Weight Distribution Systems. This is gonna be a 10 inch system, meaning it's gonna fit up to 10 inch trailer frame, so very impressive. Gives you a lot more space if you have things in the way or if you have a very tall frame. Now this heavy duty replacement kit is gonna give you two of these bars here with the four square holes in 'em.

As you can see, they're nice, thick, and beefy. They have a nice powder coat finish on 'em. You got the two long bolts. You got the C channel support frame, same square holes all the way through it. And then of course, the main L support beam and the L pin and clip here that your spring bar is gonna be riding in this channel right here.

So again, folks, this will include the two support brackets and the mounting hardware. This is enough to do one side of that trailer frame. So again, if you need both sides, then obviously you need to buy two of these kits to accommodate that. Now this does fit and it's made to support the support brackets or replace support brackets for the Curt TruTrack 2P Weight Distribution System with the integrative active sway control. But it excludes the models that use chains.

So if you have chains on your model, this is not the right kit for you. This is gonna need something else instead of this kit. Well, folks, that is gonna wrap it up for our quick look together at this replacement adjustable support bracket kit for the Curt TruTrack Weight Distribution Systems up to a 10 inch frame. I'm Steven, thanks for watching.