Trailer Hitch Receiver Recommendation and Wiring For a 1990 Ford F-350 Ambulance
Updated 06/14/2021 | Published 06/11/2021 >
Products Featured in This Question
Question:
I just picked up a 1990 Ford F-350 Ambulance. I’m looking to get a rear hitch, do you have anything that’d fit?
asked by: Nick D
Expert Reply:
For your 1990 Ford F-350 Ambulance I recommend the Curt Trailer Hitch Receiver # C14082. This receiver is specifically designed for the cab and chassis like that which your Ambulance was built on. This receiver is rated for 1,000lbs of tongue weight and 10,000lbs of trailer. If you use a weight distribution hitch the rating increases to 1,200lbs of tongue weight and 12,000lbs of trailer weight.
If you plan on doing any towing and do not have any trailer connection wiring already on your Ambulance you will need the Curt T-Connector Vehicle Wiring Harness # C55316 to give you a 4-way flat connection for small trailers.
For larger trailers with electric brakes you will also need the Universal Installation Kit for Trailer Brake Controller # ETBC7 along with a Tekonsha Prodigy P3 Trailer Brake Controller # 90195. This will allow you to control up to 4 braking axles that use electric brakes or electric over hydraulic brakes. The controller is customizable and includes a diagnostic function if you have any issues with the trailer brakes.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- For Towing
- Class IV
- 1000 lbs TW
- 10000 lbs GTW
- 12000 lbs WD GTW
- 2 Inch Hitch
- 1200 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Side Plate and Bolt Hole Spacing Measurements for Curt Trailer Hitch # C14082
- Q&A: Bolt Hole Spacing of Curt Class IV Hitch Receiver 14082
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Does Curt Hitch # C14081 Fit 1991 Chevy C/K Truck with Frame Width of 37 Inches Outside to Outside
- Q&A: Is Drilling Required for a Custom Mount Hitch on a 1985 Chevrolet C/K Series Pickup
- Q&A: Will The Draw-Tite Universal Spare Tire Carrier Work With My 8 Lug Wheels?
- Q&A: Curt Trailer Hitch Receiver Part # 13028 Dimensions
- Q&A: Will the Curt Hitch 13028 Fit a 1966 Chevrolet C10 with Aftermarket Bumper
- Article: How to Choose the Right Trailer Hitch Class
- Article: Slipper Spring Trailer Suspension System Review
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Article: Determining Trailer Tongue Weight
- Article: The 5 Best Trailer Drop Hitches You Can Buy



