Converting Magnetek Converter 6300 to work with Lithium Batteries

Question

Question:

Hi I own a 97 lance camper and my converter is humming all the time when plugged to shore power, the converter is a Magnetek series 6300 A model 6345. I would like to change it but I want to upgrade to a converter that can handle lithium batteries as I am planning to change my batteries too. Maybe I should stick to AGM batteries? I currently have 2 lead acid batteries 12V 150amp/h each. I am not sure what I need to buy and would love any recommendation. Thanks a lot.

asked by: Flora D

0

Expert Reply:

To convert your Magnetek Converter 6300 to work with lithium batteries you'd need the part # PD4635LIV and you'd be set.

expert reply by: Jameson C

0

Answer 1

The #ETBC7 would just cover the wiring for a brake controller and the adapter to convert the 4-way to a 7-way so it would not be all that you'd need. You'd need to use it and a brake controller like the BRAKE-EVN part #TK63VR to activate the…

view full answer...

Answer 2

Hi David, We have what you are looking for to upgrade your B-W Manufacturers 6332 converter to one that will charge lithium batteries. All you need is the Progressive Dynamics part ##PD4635V and you're set.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 7

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 8

Yes, you do have the exact right replacement converter for your 45 amp Magnetek 6345, which is the option from Progressive Dynamics: - Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V I have added links below to…

view full answer...

Answer 9

Hey Kent, That original power converter, although unnamed, is a Parallax or MagneTek brand converter. They are different companies but essentially the same part, or identical parts. With that said we do have a Progressive Dynamics Power Converter,…

view full answer...

Answer 10

Hey Brandon, I would strongly recommend sticking with the Tekonsha RF brake controller part #TK94FR. We know this works really well and it sounds like it worked well for you too. The Curt Echo is not reliable enough for me to really ever recommend it…

view full answer...

Answer 11

Hello again Daniel, The B-W (B-W Manufacturing / Parallax) 6300 Series Model 6345 is an older converter/charger unit designed primarily for lead-acid batteries, such as flooded or AGM deep cycle batteries. These older converters typically charge at a…

view full answer...

Answer 12

We can get you everything you need for towing with your 2017 Toyota Sienna XLE. By plastic shield, I believe you are referring to the appearance panel underneath the Sienna, and that will have to trimmed a bit in each of the hitches available for the…

view full answer...

Converting Magnetek Converter 6300 to work with Lithium Batteries

Continue Researching