Will the Draw-Tite Hitch for 2021 Toyota Sienna Work With Hands Free Liftgate Feature

Question

Question:

Can you give me a definitive answer as to if this hitch is installed, will the kick sensor still work to open the liftgate?

asked by: John

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver part # DT55MR which is a fit for a 2021 Toyota Sienna will still allow operation of the hands free liftgate feature. That said, you'll need to place your foot on either side of the receiver tube opening but aside from that there will be no further issues.

expert reply by: Conner L

0

Answer 1

Between the etrailer #e56RR and Draw-Tite #DT55MR for your 2024 Sienna I would choose the etrailer hitch. The only major differences between the two hitches are the capacity and the powder coat finish. It is true that the Draw-Tite has a higher…

view full answer...

Answer 2

The difference between the Curt Hitch - 2" #C22UR and the Draw-Tite - 2" #DT55MR for your 2021 Toyota Sienna is the weight capacity. While the Curt offers 350 pounds of maximum tongue weight/3,500 pounds of maximum gross towing weight, the…

view full answer...

Answer 3

I would be more than happy to recommend a trailer hitch for your 2022 Toyota Sienna. Both the Draw-Tite #DT55MR and Curt #C22UR have identical designs when it comes to mounting bracket installation and hitch height so I recommend going with the Curt…

view full answer...

Answer 4

For your 2021 Toyota Sienna we have the Draw Tite Class III hitch part #DT55MR that has the highest towing capacities of 4,500 lbs trailer weight and 675 lbs tongue weight.

view full answer...

Answer 5

Let's start with the two trailer hitches you were referring to that fit your 2021 Toyota Sienna, which are the following: - Curt Trailer Hitch Receiver #C22UR - Draw-Tite Max-Frame Trailer Hitch Receiver #DT55MR They are very similar 2 inch…

view full answer...

Answer 6

For your 2021 Toyota Sienna XSE Hybrid, I recommend going with the American made Curt #C22UR. Your Sienna Hybrid is rated up to 3,500 pounds towing and 350 pounds of tongue weight capacity, at least that I could find, so the Draw-Tite #DT55MR with…

view full answer...

Answer 7

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #DT55MR over the Curt Trailer Hitch Receiver #C22UR for your 2022 Toyota Sienna. The Draw-Tite has larger chain hanger openings which will make it easier connecting the safety chains of any…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Will the Draw-Tite Hitch for 2021 Toyota Sienna Work With Hands Free Liftgate Feature

Continue Researching