Draw-Tite or Curt Trailer Hitch For 2021 Toyota Sienna

Updated 05/07/2021 | Published 05/06/2021

Products Featured in This Question

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(180)

$80.55

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(351)

$202.93

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(138)

$183.25

Question:

I see there is a curt and draw-tite trailer hitch for a 2021 toyota sienna. which one do you think I should go with or are they pretty much the same?

asked by: Roger E

Expert Reply:

Let's start with the two trailer hitches you were referring to that fit your 2021 Toyota Sienna, which are the following:

- Curt Trailer Hitch Receiver # C22UR

- Draw-Tite Max-Frame Trailer Hitch Receiver # DT55MR

They are very similar 2 inch hitches that are both easy bolt-on installations, but I recommend the Draw-Tite # DT55MR, for a couple of reasons.

One is that it has higher overall capacities, which not only speaks to the strength of the hitch, but the higher tongue weight capacity of the Draw-Tite (675 lbs vs. 350 lbs) can be especially important for towing or if you are using the hitch for something like a cargo carrier and need to stow a lot of gear.

The other reason I like the Draw-Tite is just the look; it is straight as opposed to the somewhat curved shape of the Curt, and has a less glossy overall finish (though that is admittedly personal preference).

The only other thing I wanted to mention is that if you are going to be using either hitch for towing and you also need a trailer wiring harness for your 2021 Toyota Sienna, the correct part is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK69FR.