Replacement Remote For Jenson JWM72A Stereo System

Question

Question:

Will this remote work?

asked by: Jennifer S

0

Expert Reply:

The remote you need for your Jenson JWM72A is in the Replacement Service Pack for Jensen RV Stereo
Item # JEN55VR.

expert reply by: Kevin C

0

Answer 1

If you want to upgrade from your Jensen stereo #JWM70A we have a great option for you. Furrion makes a really nice Rv stereo #DV1230BL. This has an HDMI port to connect your laptop, as well as USB and AUX ports. It is also Bluetooth compatible so you…

view full answer...

Answer 2

To replace the aerator on the #PF281008 you can use the Phoenix Faucets Aerator for RV Kitchen Faucets - Chrome #PF281021, which is a low flow aerator to help conserve water in your RV.

view full answer...

Answer 3

To replace the remote for your Jensen #JWM70A you'll need the replacement service pack #JEN55VR. This stereo uses an infrared sensor to register what the remote is doing, so all you have to do is put in the batteries and point the remote at the…

view full answer...

Answer 4

The only way you can get the replacement remote control for the Jensen RV Stereo - Single DIN - AUX/USB, Bluetooth, jControl - 12V, part #JWM70A, is to get the Replacement Service Pack for Jensen RV Stereo, part #JEN55VR. I have included a product…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Remote For Jenson JWM72A Stereo System

Featured Help Information

Miscellaneous Media

Continue Researching