Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR76ZR

content loading

Customers compare MR76ZR to these similar products




Products Featured in this Video



MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR76ZR Review


Hey everybody. I'm Ellen here at etrailer.com and we're taking a quick look at the Moryde upgrade suspension kit for your tandem axle trailer. This is going to give you upgraded hardware to make sure that you don't have any issues with that hardware wearing out. It's going to be a lot more robust and durable. It's also going to be easier to maintain over time. So it should, again, last you a lot longer than your typical or your stock hardware.

So let's take a closer look at the kit and talk a little bit more about what comes in it. And I'll give you some specs to make sure that it is going to be the right fit for you. So again, this is for a tandem axle trailer. So you're gonna have everything that you need for both sides of that trailer. And basically this hardware is just going to connect to your hangers and go between your leaf Springs and the equalizers and make sure that everything is moving around properly.

So this was going to be our shackle bolt assembly. We'll have our shackle straps the wet bolts with the grease zerks on the end you also have the brass bushings. So everything here is going to be a lot more durable and robust than your typical again, stock assembly. The shackles measure about a half inch in thickness and then about an inch and a half wide. Overall length is about four about four and three quarter inches long.

The distance between each of our bolts center to center is three and an eighth. So that's the distance between those two bolts. If we go right from the center now the bushings have an outer diameter of 11 sixteenths an inner diameter of nine sixteenths. So our bolts also have a nine 16th inch diameter. This space between our shackles is about one and three quarter inches.

That's how big or how tall our bushing is as well. So hopefully, those measurements give you an idea of the size here and what to expect all in all should be a really nice, complete kit. Something else that I like about this kit in particular is that it does come with instructions on how to get this installed. Now, a lot of hardware will not come with instructions of any kind or if it does, it's pretty limited. This does a pretty good job. I know it's kind of a small thing but I just always like to have instructions. If you're an old hand at this it's going to be nothing different than any other kind of suspension hardware but if you're new to it, it's always nice to have a guide. So it does come with that but that's pretty much all there is to it for our quick look at the Moryde upgrade suspension kit. I hope this has been helpful in the setting of this is the right one for you. We do have a lot of other accessories and parts for your trailers here at etrailer.com. So be sure to check them out. Thanks for watching..


Questions and Comments about this Video

Info for this part was:

Employee Kathleen M
Installed by:
Kathleen M
Employee David F
Installed by:
David F
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.