Single 3-Wire Slide-Out Switch Replacement

Question

Question:

I have a 2004 Forest river Salem lite with a power gear above floor slide. The slide will go in but not out. Will go out manually. Currently a 3 wire connection to the switch Will this work?

asked by: Jim M

0

Expert Reply:

The Single Slide-Out Momentary Switch - On/Off/On - 4-Pin - Black Item # 37212395 is the correct replacement for you.

expert reply by: Kevin C

0

Answer 1

The Lippert Slide-Out Switch Assembly - White #LC117461 is a four wire switch. I reached out to Lippert and they confirmed that its is a 4 wire switch. The Lippert Slide-Out Switch Assembly - Black #LC117460 Is a five wire switch. They both will work…

view full answer...

Answer 2

More than likely the issue is coming from using a 4-wire switch #LC117461 on a 5-wire set-up. We do have a 5-wire switch available, which will allow you to wire it up how it needs to be wired. - Lippert Slide-Out Switch Assembly #LC117460

view full answer...

Answer 3

The Lippert Components Slide-Out Switch Assembly - White #LC117461 or black #LC117460 will work well for you. I've attached the wiring color coding in a photo to assist in your rewiring.

view full answer...

Answer 4

Yes, the Lippert Slide-Out Switch Assembly #LC117460 would work as a replacement for your current switch, but I would definitely check out the wiring running to it to ensure there wasn't additional damage. I've attached a diagram below of…

view full answer...

Answer 5

The Lippert Components Slide-Out Switch #LC117460 does have 5 wires like you're looking for. If you can let me know which controller your slide out unit uses (the number on the top or side of the controller signifies which unit it is) I can…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Single 3-Wire Slide-Out Switch Replacement

Product Page this Question was Asked From

Continue Researching