Awning for Sunray Sport Trailer  

For that light of a trailer I would recommend you go with electric brakes. I would be concerned that the surge brakes would not activate properly, and since there is no adjustment for them you would be in a bind. One of the advantages to electric…

Yes, the 60-Degree angle of the 1/2"-20 DeeMaxx Trailer Wheel Lug Nut #DE93GR is standard for the vast majority of trailer wheels out there. There are some 90-Degree cone shapes but these are typically for 5/8" and 9/16"…

I reached out to a representative of Rhino Rack who told me that when folded, zipped up and sitting on the rack, the Batwing Awning #RR33200 measured just slightly over 98 inches. So you were correct that it was very close to 8 feet (96 inches)…

The Hook and Keeper for Enclosed Trailer Door part #PLR9-A are not spring loaded. That said, we do have spring loaded options like the 45-Degree T-Style Hook and Keeper Door Holder for Enclosed Trailer part #37211765. We don't have any…

From the pictures you sent in it looks like the inner diameter of your Nev-R-Lube bearing is about 2" which means you'd need the 50MM Nev-R-Lube Bearing for 8,000-lb Dexter Axles #31-71-3. Aside from that you're basically…

I checked with Dexter and they indicate that for hub 008-386-80: "Available for service parts only." Meaning the actual hub assembly is not available but parts for it are such as the 35mm cartridge bearing #31-72-3. There…

Dexter Nev-R-Lube Bearings such as the 50MM #31-71-3 referenced in your question do not have a specific maintenance or replacement schedule. These are pre-lubricated at the factory, which will make it resistant to contamination, and sealed for life…

No, the etrailer Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10 Diameter - 5 on 4-1/2 Item #AKHD-545-35-EZ-K that you referenced comes as a single hub and drum assembly so you need to purchase 2 of them for each axle on your trailer.…

Yes, it is possible. To get started you will need a hub and drum that matches the bearing and seal on your trailer spindle and your wheel bolt pattern. Confirm this by checking the bearing part number, and seal part number. Next, you will need left…

A 19 mm socket would be needed to remove the DeeMaxx Lug Nut part #DE93GR.

Torsion axles use internal rubber cords to provide the suspension motion and they really are not practical to repair/rebuild. Certainly any axle that was damaged in an accident should be replaced purely for safety reasons. It is potentially possible…

Actually on brake magnets for trailers either wire can be used as the power or the ground so the colors don't really mean anything. Most likely the magnet manufacturer just put what ever color was most convenient on your trailer.