Determining The Correct MORryde CRE3000 Equalizers For Triple Axle Trailer W/ 33" Axle Spacing

Updated 05/07/2021 | Published 05/05/2021

Products Featured in This Question

MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33" Wheelbase - 8K

(719)

$431.96

MORryde Suspension Upgrade Kit for Triple Axle Trailers - 3-1/8" Long Shackle Straps

(1958)

$183.60

MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps

(1958)

$155.41

Question:

I want to replace worn out Lippert EQUAFLEX equalizer kit see attached photos on my 2016 Forrest River Vengence model 39R12 with the MORryde CRE3000 equalizers. This is a triple axle 5th wheel with Dexter 7000lb axles. Axle spacing is 33. Is MR59ZR the correct item? Would also like to purchase the upgrade wet bolt kit with bronze bushings. PS I couldnt tell what the CRE shackle hole spacing is but my current Lippert has 3 1/8inch hole spacing on the shackles....dont know if it makes a difference or not. Thanks for your help.

asked by: Jack D

Expert Reply:

Since your 2016 Forest River Vengeance Model 39R12 has 33" axle spacing and triple axles the # MR59ZR will likely work just fine for you, but you will need to take a few measurements first.

The first measurement is from the bolt hole in the rear frame hanger to the front frame hanger, you will need to have a measurement of at least 91-7/8" for this system to work correctly.

The second measurement is from the frame to the bolt hole in your hangers. If your hangers are at least 4-1/4" tall and your axles are over slung meaning that the axle is underneath the leaf springs then you will be able to use the MORryde Shackle Upgrade Kit for Triple Axle Trailers w/ 3-1/8" Shackles # MR26ZR.

If you hangers are not at least 4-1/4" tall or your axle is not over slung you will need to use the 2-1/2" Shackle kit # MR86ZR instead.

I included video reviews for each of the products mentioned for you to take a look at.