Solution for Kwikee Series 32 RV Step Module 151320 Replacement

Question

Question:

I have a 2001 Monaco Diplomat and the step gearbox 151320 type A is worn out. It has a 2 wire 205-1007 motor attached to a 151332. Looking at your website LC379160 and LC379608 is what I am thinking will work on this Kwikee Model 38 steps. Please let me know if I am correct

asked by: Jerry R

0

Expert Reply:

We've checked with Kwikee in the past and based on your gear box number of 151320 that indicates the components of your step are no longer available due to age. So what you'd need to do is go with the current version of the Series 38 which is part # LC3723383 for a step replacement.

expert reply by: Jameson C

0

Paul

9/20/2025

Do you have a picture?

Jameson C.

9/22/2025

@Paul I don't have a picture I can attach on this page but I believe the issue is that the part number I mentioned above actually had a typo in it and the correct part number is the part # LC3723383.

Answer 1

I reached out to the manufacturer who told me the Kwikee Series 25 Steps #LC365837 you are looking to replace your older steps with will not work. This is what they told me: "Per my parts department, based on the information you have provided,…

view full answer...

Answer 2

The Replacement Control Unit for Kwikee Electric RV Steps #LC379146 which is part 90950600 you referenced is does not have a specific wiring diagram, but I've attached the closest thing and have also included a video of an installation to…

view full answer...

Answer 3

The Lippert part number #LC372261 is the part number for an entire replacement step assembly. The problem is that if you have the 151320 gear box that means that your current step is old enough that there aren't replacement parts for it and…

view full answer...

Answer 4

No, it will not Andy. The Advent Air RV Air Conditioner item #ADV86SR has the new R32 refrigerant in it, which means it is not backwards compatible with any AC systems from 2024 or earlier. Which Coleman Mach A/C do you have? The Furrion Chill HE…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Solution for Kwikee Series 32 RV Step Module 151320 Replacement

Products Featured in This Question

Continue Researching