Solution for Needing Replacement Manual Crank Handle for Atwood Powered A-Frame Jack

Question

Question:

I would like a manual crank handle for my . Atwood Heavy duty MPD 86065

asked by: Stan C

0

Expert Reply:

The original Atwood manual crank you are looking for is no longer available but we have the Replacement Crank Handle for Stromberg Carlson Landing Gear # LG-119226 that will work for your Atwood Electric Jack. This is a much longer option which would be a little awkward but the only full manual crank we have that is compatible. You can alternatively use the Ultra-Fab T-Slot Power Drill Adapter for Scissor Jacks # UF48-979071.

expert reply by: Jameson C

0

Answer 1

The Atwood manual crank you referenced we no longer carry. The Replacement Crank Handle for Stromberg Carlson Landing Gear #LG-119226 is the manual crank we have that will work for your Atwood Electric Jack. This is a much longer option which would…

view full answer...

Answer 2

Since Atwood has gone out of business, their replacement parts are pretty hard to find. With that being said, the: -Replacement Crank Handle for Stromberg Carlson Landing Gear #LG-119226 will fit most Atwood jacks, however this crank handle will be…

view full answer...

Answer 3

That's really good info! Thanks for coming up with that and passing it on. I posted it here so that others in your situation could be helped by it.

view full answer...

Answer 4

There is one option that has the right dimensions to replace the Atwood 87891, which is a handle from Stromberg Carlson: - Replacement Crank Handle for Stromberg Carlson Landing Gear #LG-119226 The metal shaft where it attaches to the jack has an…

view full answer...

Answer 5

Yes, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp, #PD4655V is what you are looking for. This upgrades or replaces the converter section for 55-amp Parallax/Magnetek, WFCO, or Parallax RV power centers and works…

view full answer...

Answer 6

We do not have any direct replacements, unfortunately, but we do have manual crank handles like the Replacement Manual Crank Handle for Stromberg Carlson Electric Trailer Jacks #SC94VR which could work as long as the socket is the same 7/16"…

view full answer...

Answer 7

There are a few different drill adapters for different jacks. The hex head #UF48-979005 sounds like what you describe so we know it won't work. The other type is what is called a T-Slot such as #UF48-979071. It has a shaft length of 2.5 inches,…

view full answer...

Answer 8

I went and pulled an Ultra-Fab T-Slot Power Drill Adapter #UF48-979071 from our warehouse to measure the inside diameter of the open end of the adapter and found that it measures .627 inches or 15.9 mm.

view full answer...

Answer 9

Hello John, sorry to hear the drill adapter is not working for you. Our records show your Atwood MPD 86065 electric jacks would use a drill adapter that is 0.53" in diameter. The #UF48-979071 adapter is more like 0.66" so too big. We used…

view full answer...

Answer 10

The Ultra-Fab T-Slot Power Drill Adapter for Scissor Jacks #UF48-979071 will have a slot that is 1/4 inch wide. I've attached that new dimension to the product photo for you.

view full answer...

Answer 11

Atwood is no longer in business so those camper jacks are no longer something available for purchase. While I realize that's not what you wanted to hear, there are options for replacements that I wanted to mention so you have that option: -…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Solution for Needing Replacement Manual Crank Handle for Atwood Powered A-Frame Jack

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching