Replacement Shroud For Older Coleman Mach 7000 Series AC

Question

Question:

I have a 1996 Coleman model 7333B886 roof top unit and need to replace the A/C cover. Will the MA00-325001 replace it or is another model needed? The A/C unit without the cover is 32 inches long x 22 inches wide x 13.5 inches tall.

asked by: Richard L

0

Expert Reply:

We do have a fit for your older 7000 Series Coleman Mach air conditioner, though the one you mentioned is not quite tall enough for your AC. So instead, what you will need is the following:

- MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP Brand # MA8335A5261

This cover measures 37" long x 26" wide x 13-1/2" tall, so it has the length, width, and height needed for your AC.

expert reply by: Kyle S

0

Answer 1

Hey Roger, thanks for reaching out! According to my research the Vent Cover for Ventline Old-Style Rounded Dome #BV0554-03 would fit because of the continuous hinge on it (see attached photo). This means the Metal Low Profile Replacement Cover…

view full answer...

Answer 2

The MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP Brand RV Air Conditioners - White #MA8335A5261 is the replacement I recommend for you and it has a simple installation. It will fit your Coleman AC unit.

view full answer...

Answer 3

The air conditioner that cam standard on your Fleetwood Jamboree is the Coleman 13,500 btu. The shroud you will want is the MaxxAir TuffMaxx Replacement Shroud for Coleman-Mach RV Air Conditioners - Polar White #MA00-325001 or Arctic White…

view full answer...

Answer 4

That part number corresponds with a Coleman Mach AC unit so for a replacement shroud the MaxxAir Replacement part #MA8335A5261 that you referenced would fit and work great.

view full answer...

Answer 5

The Wheel Masters Lug Nut Covers #WM8011 that you referenced do fit the size lugs you mentioned of 1-1/16" which is commonly found on Ford RVs like your 1997 Ford E-350 Class C so it will fit but they are all press-on style covers. There…

view full answer...

Answer 6

For your RVP 7000 / 8000 series AC on your 2002 Keystone Hornet you can use the Replacement RV Air Conditioner Cover for MaxxAir Units #MA8335A5261 for a replacement shroud.

view full answer...

Answer 7

The MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP Brand RV Air Conditioners - White #MA8335A5261 is the correct fit for your 7300 series RVP. The shroud is 37 inches by 25 by 13-1/2 inches. If you don't want the two piece unit…

view full answer...

Answer 8

Are you Thanks for the dimensions and picture of your shroud. Based on that it looks like you have a Coleman like what the #MA00-325001 is designed to replace. It's designed to fit Coleman-Mach Mach 1, Mach 3 and Mach 15 models and includes…

view full answer...

Answer 9

Hey Ryan, Indeed there is a Sidewinder that has the correct bolt pattern to replace your Lippert Rhino pin box. I went ahead and verified directly with the manufacturer for you that the correct replacement is the following: - Reese Sidewinder 5th…

view full answer...

Answer 10

The new Rhino Box from Lippert currently has no replacements so you won't be able to swap out this pin box with a Sidewinder to add more turning clearance. Because of this you'll have to use a sliding 5th wheel hitch in your 6.5' bed to…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Shroud For Older Coleman Mach 7000 Series AC

Featured Help Information

Miscellaneous Media

Continue Researching