Coleman Air Conditioner Shroud Recommendation for 1995 Tioga Montana Class C

Question

Question:

TSR 73305061 on 1995 Tioga Montana Class C, 24. We need this replaced and are having no luck. Approximate measurements of shroud are 41x29x14. Any idea what we would use? Thanks.

asked by: Terry J

1

Helpful Expert Reply:

Are you Thanks for the dimensions and picture of your shroud. Based on that it looks like you have a Coleman like what the # MA00-325001 is designed to replace. It's designed to fit Coleman-Mach Mach 1, Mach 3 and Mach 15 models and includes mounting hardware. I attached a dimension pic as well.

expert reply by: Jameson C

1

click to enlarge

Answer 1

Yes, we carry the MaxxAir #MA8335A5261 which will fit as a replacement shroud for your Coleman Mach 7333A887.

view full answer...

Answer 2

We do have some different air conditioner shrouds available which I have linked our selection to this page for you to filter through. I tried looking up the dimensions online but was unable to come up with anything. I recommend taking a look at the…

view full answer...

Answer 3

I reached out to my contact at MaxxAir, and while there is not a direct replacement shroud for your Coleman Model 7332B896 RV air conditioner he mentioned that the MaxxAir Replacement RV Air Conditioner Cover #MA8335A5261 will fit perfectly but will…

view full answer...

Answer 4

The Airxcel 48000 Series RV AC unit is the Mach 15 which we do have a replacement shroud for with #MA00-325001 which is white. This is also the same shroud that fits the Mach 3 that you have as well so this cover would work for all of your needs.

view full answer...

Answer 5

We do have a replacement shroud for the Coleman Mach air conditioners. The correct replacement is part #MA8335A5261. If you click the provided link, you can see a product description video featuring the #MA8335A5261 replacement shroud.

view full answer...

Answer 6

Actually, the #MA00-325001 shroud you'd already looked at would be the correct replacement for you. If you click the provided link, you can see a product description video featuring the replacement shroud I recommended.

view full answer...

Answer 7

We do have a fit for your older 7000 Series Coleman Mach air conditioner, though the one you mentioned is not quite tall enough for your AC. So instead, what you will need is the following: - MaxxAir Replacement RV Air Conditioner Cover -…

view full answer...

Answer 8

The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…

view full answer...

Answer 9

Hey Ryan, Indeed there is a Sidewinder that has the correct bolt pattern to replace your Lippert Rhino pin box. I went ahead and verified directly with the manufacturer for you that the correct replacement is the following: - Reese Sidewinder 5th…

view full answer...

Answer 10

The new Rhino Box from Lippert currently has no replacements so you won't be able to swap out this pin box with a Sidewinder to add more turning clearance. Because of this you'll have to use a sliding 5th wheel hitch in your 6.5' bed to…

view full answer...

Answer 11

While we do have some replacement pin boxes for the Rhino pin box, we'll have to look at an alternative setup since there are no Sidewinder replacements for your application. For your application you can use the Demco Hijacker Autoslide which…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Coleman Air Conditioner Shroud Recommendation for 1995 Tioga Montana Class C

Continue Researching