Does the Voyager RV LCD Observation Monitor VO34FR Have Split-Screen

Question

Question:

Does this monitor provide the. same features as the Voyager AOM7694 like the split screen. I am replacing. I do not need the navigation wires. Thank you for your help.

asked by: Rod B

0

Expert Reply:

The Voyager RV LCD Observation Monitor part # VO34FR has a trigger activation as well as a manual activation. In other words, you can switch between cameras when the trigger wire receives power or you can do so manually with the buttons on the monitor. It does not have split-screen mode.

There is not a replacement for the Voyager AOM7694 with split-screen.

expert reply by: Conner L

0

Answer 1

The Voyager monitor part #VOM719WP will work great as a replacement monitor for what you have now with the AOM-7694.

view full answer...

Answer 2

You can replace your Voyager AOM-711 monitor with the Voyager RV LCD Observation Monitor #VO34FR. If you also have an older black and white rear camera then you can also replace it with Voyager Rear Camera #VCMS17B, which will be a direct plug-in for…

view full answer...

Answer 3

The #VO344FR monitor you mentioned wouldn't be compatible, the correct replacement would be part #VOM719WP. I've linked you to a product description video. I hope that helps!

view full answer...

Answer 4

So long as you are okay with splicing, then Voyager has told us that you can replace your AOM7694 with the Voyager RV Backup Camera Monitor - 7" Screen - 4 Video Inputs #VOM719WP. The wires on the #VOM719WP are labeled, so I recommend making a…

view full answer...

Answer 5

Hey Ronnie, the Voyager Monitor #VOM719WP will replace your AOM-7694 monitor per Voyager, but you will have to splice the existing wires from your AOM-7694 to the new Voyager Monitor. There is no direct plug and play replacement monitor.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Does the Voyager RV LCD Observation Monitor VO34FR Have Split-Screen

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching