Search: tst   >  

Yes, you can swap out your cap sensors for internal sensors and they will work with your current TST-507-RV-4 system. We offer the internal sensors individually with part #TST-507-INT-S1. Definitely a good idea if you don't want to have to…

According to my research you have a damaged water valve that could have become brittle if you left the Dometic 320 toilet out in the cold winter temps. To fix this you need to replace the water valve with part #DOM93FR.

With the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long #e78SR and 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long #e34SR both being rated for 6,000lbs there won't be a noticeable…

The Trailer Axle with Electric Brakes part #e73SR is made by AxleTek. If you're looking for a more well known manufacturer, we offer this same setup from Dexter as well, the Dexter Trailer Axle with Electric Brakes part #8327826-EB which is also…

When choosing a replacement axle you want one that is the same length. Since you have a hub face measurement of 86.51" a better choice would be an 86-1/2" axle. The #e65SR is an 89" axle so it is several inches longer. Also, you…

The Trailer Axle with Electric Brakes part #e73SR has a slight arch to it which is designed to flatten when the trailer is loaded so you cannot rotate the axle to shift the spring seats on top. It's setup from the factory for underslung…

You do have some odd measurements. You can absolutely use the parts that you mentioned and drastically change all of your trailer connection points (Plan A), however, I recommend doing something much easier and cleaner. It won't require finding…

I called and emailed JR Products multiple times with no response so instead of purchasing the Quick Links - 1/2" #37201345 I recommend going with the Curt Threaded Quick Link - 1/2" Diameter #C82932, which have a safe working weight load of…

I checked with Valterra and the StayPut Stand Pads like #A10-0924 can hold up to 40,000 lbs gross vehicle weight on a firm level ground, or 10,000 lbs per wheel.

As you have the Monitor #TST-507-D-C you will simply need the Signal Booster #TST-507-R to go along with some new tire sensors. You do have the option of what sensors you will prefer to use from the list below. Brass Tire Sensors for TST TPMS - Qty 2…

Trailer or automotive wheels can have a positive or negative offset. The offset refers to the distance between the mounting surface of the wheel that touches the hub and the center line of the wheel, as shown in the diagram I have edited for you. A…

I do have an RV trailer hitch receiver that may work for you in the Adjustable Width Trailer Hitch Receiver part #13703. The hitch receiver will fit trailers with frame rails from 22" to 72" apart. The frame brackets sit about 3" down…